Vertex Standard VXR-7000 Operating Manual page 13

CE27 Programming Software Instruction
TX Pwr: [ Transmitter Power Output Selection ]
This parameter selects the desired power output
from the VXR-7000 on the current channel. The
available values are HIGH and LOW.
Double-click the left mouse button to select "Hi" or
"Lo".
TOT Mute: [ Enable/disable the TOT beep monitoring ]
Double-click the left mouse button to toggle the TOT
Mute feature selects "on" or "off". When this param-
eter is set to "on", the alert beep will sound from
the front panel speaker before the repeater turns it-
self off.
Rpt Use:
[ Enable/disable the TOT while operating in the repeater mode ]
Double-click the left mouse button to toggle the Re-
peater TOT (Time-Out Timer) selects "yes" or "no".
The TOT time is determined via dealer program-
ming.
TOT Beep: [ Enable/disable the TOT beep Transmission ]
Double-click the left mouse button to toggle the TOT
beep selects "yes" or "no". When this parameter is
set to "yes", the alert beep will be sent out on the air
before the repeater turns itself off, while operating in
the "REPEATER" mode.
VXR-7000 FM Repeater Operating Manual
Channel.Data.Items
RPT HT: [ Enable/disable the Repeater Hang-on Timer ]
Double-click the left mouse button to toggle the Re-
peater Hang-on Timer selects "yes" or "no". When
this parameter is set to "yes", the repeater will re-
main keyed for a desired seconds after a receiving
carrier is dropped.
The Hang-up time is determined via dealer pro-
gramming.
RPT GT: [ Enable/disable the Repeater Guard ]
Double-click the left mouse button to toggle the Re-
peater Guard feature selects "yes" or "no". When
this parameter is set to "yes", the transmitter inhibit
few second before the repeater is unkeyed.
The inhibit time is determined via dealer program-
ming.
CE27 Main Screen (Scrolled Right)
11