Vertex Standard VXR-7000 Operating Manual page 12

CE27 Programming Software Instruction
DDec Type: [ DCS Decoder Type ]
This command selects the manner in which DCS is
to be decoded.
Fixed = Decodes only the type selected in above
parameter (DCS Typ: Normal or Invert-
ed).
Auto = Both types (Normal and Inverted) will be
decoded.
Double-click the left mouse button to select the de-
sired DCS Decoder Mode.
Multi Tone: [ Enable/disable Multi Tone Operation ]
Double-click the left mouse button to display the
"Multi.Tone" window.
Double-click the left mouse button on the "Multi
Tone Enable" to toggle the Multi Tone Operation be-
tween selections "yes ("
the left mouse button on the appropriate field to
open the "Drop Down List". Now select the desired
CTCSS tone or DCS code. You may set as many as 16
CTCSS tones and/or DCS codes.
CWID ANI/ENI: [ Select the Identifier mode ]
Double-click the left mouse button to toggle the se-
lections "CW ID", "ANI/ENI", or "off". To select this
feature to the "CW ID" or "ANI/ENI", the "CW ID"
parameter must be enabled via the dealer program-
ming.
Action Mode: [ Select the repeater operation mode ]
Double-click the left mouse button to toggle between
"Duplex" operation or "Simplex" operation.
Tx Freq.: Edit Transmit Frequency
Use the [ 0 ] - [ 9 ] keys to enter the desired channel fre-
quency directly, and press the [ e
10
Channel.Data.Items
")"and "no (" ")". Click
] key.
Nter
CTCSS Encoders:
[ Toggle CTCSS Encoder ON/OFF, sets CTCSS Frequency ]
Double-click the left mouse
button to display the "Tone.
Select" window, click the
left mouse button on the de-
sired tone, then click the left
mouse button on the [ OK ]
switch to accept the selected
tone.
DCS Encoders:
[ Toggle DCS Encoder ON/OFF, sets DCS Code # ]
D o u b l e - c l i c k t h e
left mouse button to
display the "Coded.
Select" window, click
the left mouse button
on the desired DCS
code, then click the
left mouse button on
the [ OK ] switch to ac-
cept the selected code.
Base TOT:
[ Enable/disable the TOT while in the "BASE" station mode ]
Double-click the left mouse button to toggle the TOT
(Time-Out Timer) feature selects "yes" and "no".
The TOT time is determined via dealer program-
ming.
Base Guard: [ Enable/disable the Base Guard Feature ]
Double-click the left mouse button to toggle the Base
Guard feature selects "yes" and "no". When this
parameter is set to "yes", the transmitter will be in-
hibited for a few seconds before the repeater (in the
"BASE" station mode) turns to receive.
The inhibit time is determined via dealer program-
ming.
LOUT: [ Select the Lock Out Feature's mode ]
Double-click the left mouse button to toggle the Lock
Out Feature between "BCLO", "BTLO", or "off".
"BCLO" inhibits transmitting while there is carrier
present. "BTLO" inhibits transmitting while there is
carrier present unless there also is a valid tone pres-
ent.
VXR-7000 FM Repeater Operating Manual