Setup (Flow) - Pioneer PDR-555RW Service Manual

9.6 SETUP (FLOW)

SETUP
Load the initial settings for the CD.
Perform AVERAGE.
Disk judgment 1
(S-curve level)
Gain setting = CD/CD-R
Re-load the initial settings for a CD.
Perform AVERAGE.
Auto-adjustment of the tracking error level
Auto-adjustment of the tracking balance
Auto-adjustment of the focus gain
Auto-adjustment of the tracking gain
Search for the TOC area
Disk judgment 2
(checking ATIP signal
existence)
No ATIP signal detected
Judging the disc as a CD
Disk judgment 4
(checking TOC
existence)
TOC reading
Disc contents displayed
SETUP ends
PDR-555RW, PDR-V500, PDR-19RW, PDR-509
S-curve level low
S-curve level high
Gain setting = CD-RW
Load the initial settings for a CD-RW.
ATIP signal detected
Load ATIP special information.
Judging the disc as a CD-R.
(CD-R or CD-RW)
Judging the disc as a CD-RW.
No TOC signal detected
TOC signal detected
Search for the PMA area.
CD/Finalized CD-R
Finalized CD-RW
Disk judgment 3
CD/Partial CD-R
Partial CD-RW
PMA reading
Servo Condition
FOC Servo TRK Servo SPINDL Servo
OFF OFF STOP
OFF OFF STOP
OFF OFF STOP
OFF OFF STOP
OFF OFF STOP
ON OFF CAV
ON OFF CAV
ON ON CAV
ON ON CAV
ON ON W-CLV
or RF-CLV
ON ON W-CLV
ON ON RF-CLV
ON ON W-CLV
OFF OFF STOP
39