Table of Contents
Advertisement
Propane System
A.
WARNING
6. Turn off Propane main valve before filling Propane
container or entering an Propane bulk plant or motor
fuel service station. Turn off all pilot lights and appli-
ances individually before refueling of motor fuel tanks
and/or Propane containers. When not individually
turned off, automatic ignition appliances may continue
to spark when Propane is turned off at the container.
7. Do not fill Propane containers to more than 80%
capacity. Overfilling can result in uncontrolled
Propane flow which can cause fire and explosion. A
properly filled container holds about 80% of its vol-
ume as liquid. FAILURE TO COMPLY COULD
RESULT IN DEATH OR SERIOUS INJURY.
8. Propane regulators must always be installed with
the regulator vent facing downward. Regulators that
are not in compartments have been equipped with a
protective cover. Make sure that the regulator vent
faces downward and that the cover is kept in place to
minimize vent blockage that could result in excessive
Propane pressure causing fire or explosion.
9. Do not use a wrench or pliers to close the tank
shut-off valve. This valve is designed to be closed by
hand. If a tool is required, the valve probably needs
repair or replacement.
10. If you do not have the special tools and training
necessary, do not attempt to repair Propane system
components.
11. Motor homes stored in enclosed garages must be
well ventilated.
12. Do not modify or alter the Propane plumbing
system.
13. If any appliance or piping has been serviced,
ensure that a system leak check has been performed
by a trained technician. This should be verified before
taking delivery of the unit.by a trained technician. This
should be verified before taking delivery of the unit.
A.
WARNING
Propane cylinders shall not be placed or stored inside
the vehicle. Propane cylinders are equipped with
safety devices that relieve excessive pressure by dis-
charging Propane to the atmosphere.
FAILURE TO COMPLY COULD RESULT IN DEATH
OR SERIOUS INJURY.
09-2
SYSTEM COMPONENTS
Hoses
The hoses used in your Propane system meet
stringent requirements, and are rated to with-
stand many times the pressures encountered in
the system. Check the hoses for weather check-
ing or other signs of deterioration every time you
have the Propane tank filled or serviced. When
you replace hoses, be sure that replacements are
properly rated and approved for RV use.
Propane Regulator
The two-stage regulator produces approximately
11 inches of water column (less than 0.5 psi) to
serve your appliances. Be sure the regulator vent
stays clean and free from obstlUctions.
The regulator is mounted so that the vent is fac-
ing downward and is protected by a cover. Be
sure the cover is on at all times. If the vent
becomes clogged, it can be cleaned with a tooth-
blUsh. If con'osion is evident, contact a qualified
Propane service technician for assistance.
A.
WARNING
Do not attempt to adjust the regulator. It has been
preset by the regulator manufacturer. If any adjust-
ment is required, it must be made by a qualified
Propane service technician using special equipment.
USING PROPANE SYSTEM AT
LOW TEMPERATURES
Your Propane system will function at low tem-
peratures, provided the system components are
kept at a temperature above the vapor point of
the Propane. Ask your Propane supplier or your
motor home dealer for information on product
blends available in your area and the areas in
which you will be traveling.
The following chart shows the reduction in
available BTU's!hour under various fill levels as
the temperature drops:
Hide quick links:
Advertisement
Table of Contents
