Towed Vehicle Wiring; Deep Snow And Mud Switch (If Equipped) - Fleetwood American Eagle User Manual

Table of Contents

Advertisement

Eagle and Tradition Information
TOWED VEHICLE WIRING
Your motor home is equipped with an electrical
connector, from here on referred to as a hitch
plug, which provides an electrical connection
for your towed vehicle. The hitch plug is located
at the rear of the motor home near the hitch
receiver. It is a 7 position connector wired as
follows:
Please note this connector provides separate
positions for the two turn signals and brake
lights. This is necessary for the towed vehicles
that have separate amber turn signals in addition
to the red brake lights.
Some towed vehicles will not have amber turn
signals separate from the brake lights. They will
instead use the same lamp to indicate braking as
well as turn signal. Towed vehicles with this
type of lighting will not be able to utilize the
standard hitch plug on your motor home.
For towed vehicles with this type of lighting you
will need to replace your hitch plug. A replace-
ment hitch plug wiring harness is available
through Fleetwood's American Coach Service.
This harness replaces your current hitch plug
and is easily installed in minutes.
04-2
RUNNINGI
MARKER
LIGHTS
STOP'---'''), _
j(
NOTCH
TO POWER
OISTRIBUTION BOX
(BATTERY COMP'T)
(+)
POWER
0047
R,"GKT TURN
ELECTRIC
BRAKE
TRAILER H!I{;H plliG
AS SHOWN FROM PLUG SIDE
DEEP SNOW AND MUD SWITCH
(IF EQUIPPED)
A deep snow and mud option switch is included
with ATe. This function increases available
traction on extra soft surfaces like snow, mud or
gravel, by slightly increasing the permissible
wheel spin.
Drivers use a deep snow and mud switch to
select this feature. When this function is in use,
the ATC indicator lamp blinks continuously.
Switch and lamp locations will vary, depending
on the vehicle make and model.
Listed below is how the Deep Snow and Mud
feature works:
Function Function
Driver
System
Active
Not
Action
Response
Active
Press deep
ATClamp
snow and
blinks
X
mud switch continuouslv
Press
ATClamp
switch
stops blinking
X
again
NOTE: Turning off the ignition will also deac-
tivate the deep snow and mud feature.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

American heritageAmerican tradition

Table of Contents