Table of Contents
Advertisement
Living With Your Motor Home
"cure-all," and ventilation, storm windows, and
moisture reduction continue to be important,
operation of the dehumidifier will reduce the
amount of outside air needed for ventilation.
Heating load on the furnace will be reduced, and
the interior will be less drafty.
Dripping Ceiling Vents
During cold weather condensation frequently
forms on ceiling vents and may even accumulate
to the point of dripping onto the surfaces below.
This is frequently misinterpreted as a "leaking"
roof vent but is most often condensation drip-
page. Follow the preceding steps to control
moisture condensation, and protect surfaces with
plastic sheeting until the moisture has dissipated.
IMPORTANT INFORMATION
Mold is a fungus that occurs naturally in the
environment and serves necessary functions
including aiding in the decomposition of plant and
other organic material. Mold spreads by means of
microscopic spores borne on the wind and is
found evelywhere life can be suppOlted. Mold has
existed for millions of years, and human beings
have coexisted despite their exposure to mold and
mold spores.
]f
the proper conditions are present, mold can and
will grow in your recreational vehicle. Most RV
owners are familiar with mold growth in the form
of bread and cheese and on bathroom tile. In order
to grow, mold requires a food source. These food
sources might be supplied by items found in the
RV such as fabric, carpet, Wallpaper, or building
materials (i.e., wood, and insulation). Also, most
mold growth requires a temperate climate. The
best growth occurs at temperatures between 40°F
and 100"F. Most importantly, mold growth
requires moisture, and moisture is the ouly growth
factor that can be controlled. By minimizing inte-
rior sources of moisture, an RV owner can reduce
or prevent mold growth. However, if optimal
growth conditions persist, mold can develop
within 24 to 48 hours.
06-10
Moisture in the RV can stem from a variety of
sources such as spills, leaks, overflows, condensa-
tion, damp or standing water and human activity
such as showering or cooking. Good maintenance
practices are essential in the effort to prevent or
reduce mold growth.
What the RV Owner Can Do
The RV owner can take positive steps to reduce
the occurrence of mold growth in the RV and
thereby minimize any possible adverse effects
that may be caused by mold.
These steps may include, but are not limited to,
the following:
• Before bringing items into the RV check for
signs of mold. Potted plants (root and soil),
furnishings, or stored clothing and bedding
materials may also contain mold spores.
• Regular vacuuming and cleaning will help
reduce levels of settled mold spores.
Additionally, detergent solutions and most
tile cleaners are effective in controlling
mold growth on surfaces.
• Keep the humidity in the RV below 40%.
Ventilate kitchens and bathrooms by open-
ing windows, using exhaust fans, or mnning
the air conditioning to remove excess mois-
ture in the air and to facilitate evaporation
of water from wet sUifaces. In general, win-
dows or doors throughout the RV should be
opened periodically to ventilate the RY.
• Promptly clean up spills, condensation, and
other sources of moisture. Thoroughly dry
any wet surfaces or material. Do not let
water pool or stand in or under your RV.
• Inspect for leaks on a regular basis. Look
for discolorations or wet spots. Repair any
leaks promptly. Inspect condensation pans
(refrigeration and air conditioners) for
mold growth. Take notice of musty odors
and any visible signs of mold growth.
Other actions the RV owner can take to prevent
moisture issues include the following:
Hide quick links:
Advertisement
Table of Contents
