Table of Contents
Advertisement
Usage - Main Menu Settings
Restriction Settings (cont'd)
Main Menu > Restriction Settings
・When
appears on the "Prohibit Remote Controller" button, this function will not be available.
Main Menu > Restriction Settings> Prohibit Remote Controller
3Locking or unlocking access to the ON/OFF, Mode, Set Temperature,
and Filter Sign Reset settings from the local and other system
controllers
Show Group Name List button
1
Displays a list of group
names in a pop-up window.
Group buttons
2
Displays group numbers.
Touch the button for a specific
group to edit its settings.
Select All button
Selects all groups.
・When access to specific settings are locked,
・The settings that can be locked or unlocked depend on the type of group.
Indoor unit groups
○
1 ON/OFF
○
2 Mode
○
3 Set temperature
○
4 Filter Sign reset
46
1
2
3
4
Edit button
3
Edits the temperature range
for the selected group.
buttons
Use to flip through the pages.
(Each page lists four groups.)
will appear over the corresponding icons.
LOSSNAY groups
○
×
×
○
1. Touch the 3 Prohibit Remote Controller button on the [Restriction Settings].
2. Read the pop-up message, and touch the OK button to confirm.
3. Click on the 2 Group button on the [Prohibit Remote Controller]
screen to select the groups and change their settings.
4. Touch the 3 Edit button.
5. Use the buttons labeled 4 in the pop-up window at right to lock or
unlock access to each item.
6. Touch the 5 OK button to save the settings.
・ The screen shown left will always display the latest prohibit/permit
status. If an event takes place that changes the prohibit/permit
status of a specific item, the screen display will be updated. (The
mark will appear or disappear.)
・When this function is in use, the buttons on AT-50A cannot be
disabled from the system controller.
5
4
The display will change
as follows every time the
button is touched.
Locked → Unlocked
47
Hide quick links:
Advertisement
Table of Contents
