Mitsubishi Electric AT-50A Instruction Book page 23

Usage - Main Menu Settings
Restriction Settings (cont'd)
Main Menu > Restriction Settings
Main Menu > Restriction Settings > Set Temperature Range Limit
2Setting the temperature ranges within which the operating
temperatures can be set from the local remote controllers
Show Group Name List button
1
Displays a list of group
names in a pop-up window.
Group buttons
2
Displays group numbers.
Touch the button for a specific
group to edit the settings.
Select All button
Selects all groups.
1. Touch the 2 Set Temperature Range Limit button on the [Restriction Settings] screen.
2. Read the pop-up message, and touch the OK button to confirm.
3. Click on the 2 Group button on the [Set Temperature Range Limit] screen to select the groups to
change their settings.
4. Touch the 3 Edit button.
44
5. Use the 4
to set the range for each operation mode (Cooling, Heating, and
AUTO).
1
To clear the lower limit, keep hitting the
appears. To clear the upper limit, keep hitting the
2
3
Not all functions are supported by all local remote controllers. The
4
6. Touch the 5 OK button to save the settings.
• The temperature setting range and the operation mode that can be set depend on the indoor unit
• Operation from the local remote controllers that are connected to Mr. SLIM® cannot be prohibited
• If the temperature limits are set too high or low, the System-Changeover function may not work
Edit button
3
Edits the temperature range
for the selected group.
buttons
Use to flip through the pages.
(Each page lists four groups.)
buttons shown in the pop-up window at right
button until
appears.
buttons for the unsupported functions will be grayed out.
and remote controller models.
from the AT-50A. Use the button lock function on the controllers instead.
properly and the units may not operate in the expected mode (Cooling or Heating).
When using the System-Changeover function, it is recommended not to use the temperature
range limit function.
button until
5
4
45