Mitsubishi Electric AT-50A Instruction Book page 16

Usage - Main Menu Settings
Operation Setting (cont'd)
3. Select the cell where a specific group and a day (date) intersect to assign a pattern.
* Patterns can be copied, pasted, or deleted on the Select Group and Days/Dates screen.
e.g., The weekly schedule of a specific group can be copied and pasted to another group,
or the schedule pattern of a specific day can be copied and pasted to another day.
Refer to P32 for details.
4. On the Select Pattern screen, select [--] (deselected) or one of the 12 or 5 patterns (between [P01] and
[P12] on the Weekly tab OR between [P01] and [P05] on the One Day tab). Each pattern can be newly
configured, copied and pasted, or edited. See 1, 2, and 3 below for details.
Touch a schedule pattern to select it.
Black pattern numbers indicate that the patterns have already been configured, and the white ones
indicate blank patterns.
Operation pattern numbers
Schedules events for the selected pattern
• Appears only if the selected pattern has been configured.
• The functions not supported by the selected group will appear
① To configure a new pattern using a blank pattern
Touch a blank pattern number, then touch the
⇒ See Step 5.
If one or more patterns have been configured and saved, the message "When copying other
setting patterns to edit, select the pattern to be copied, and touch the OK button." will appear.
Touch the [OK] button to create a new pattern using a blank pattern. To use an existing
pattern as a template, select a desired pattern and then touch the [OK] button.
30
underlined in red, and they will not be executed.
* Touch the < > buttons to check the actions for each scheduled
event.
* Refer to P34 for icon definitions.
button to access the Edit Pattern screen.
② To copy an existing pattern and paste it to selected days or dates
Touch a pattern number to select it, then touch the [OK] button to return to the Select Group and Day/
Date screen. To set the schedule for other groups or days/date ⇒ See Step 2.
When setting is complete ⇒ See Step 10.
③ To edit an existing pattern
Touch an existing pattern number, then touch the
⇒ See Step 5.
If the selected pattern number is assigned to other groups or days, the message "This pattern
is used for another schedule. To use different pattern number, select the number, and touch
the OK button." will appear. To change the schedule of the day or date that was selected in
Step 3 above alone, select a new blank pattern number and then touch the [OK] button. To
change the setting of all groups and days to which the pattern is assigned, just touch the [OK]
button.
5. On the Edit Pattern screen, touch an event number to edit its contents.
Event No. Scheduled actions
ON/OFF, Mode, Set Temperature, and Fan Speed
*1 The scheduled actions for each event will be displayed over two pages.
Use the scroll buttons to switch between the pages.
*2 On the Edit Pattern screen, the events of a specific pattern can be copied and pasted to another
pattern.
Refer to P32 for details
button to access the Edit Pattern screen.
Event No. Scheduled actions
Scroll button
Air Flow Direction, Prohibit Remote Controller Operation
31