Menu Screen - Mitsubishi Electric AT-50A Instruction Book

Menu Screen

The Main Menu screen allows the user to configure the basic settings.
To access the [Main Menu] screen, touch the
[Menu] screen.
Main Menu screen
(Top screen)
1
2
3
4
2
1 [HOME] button
Accesses the [HOME] screen.
2 Back button
Returns the screen to the previous screen.
(When touched on the Main Menu screen, returns the screen to the HOME screen.)
3 Touch Panel Cleaning button
Touch this button to access the screen that will not respond when touched (except when the numbers
in the four corners are touched in a specified order), allowing the user to clean the touch panel without
accidentally changing the settings.
4 Service Menu button
Accesses the maintenance menu for service personnel. Normally, general users do no need to change
any settings in the maintenance menu.
24
icon at the right top corner of the [HOME] or the
1
3
4
1 Operation Setting
(1) Time and Schedule
(2) Collective Operation Setting
(3) Group Icon Setting
2 Restriction Settings
(1) Lock Buttons
(2) Set Temperature Range Limit Sets the temperature range for the local remote controllers.
(3) Prohibit Remote Controller
(4) Operation Mode Selection
Limit
3 Control Panel
(1) Display Format
(2) Function Key Setting
(3) Volume Control
(4) Touch Panel Calibration
4 System Management
(1) Status List
(2) System-Changeover
P61
Sets the date, time, schedules, and Setback control.
Sets the collective operation settings.
Changes the behavior of the group icon on the HOME screen.
* Three setting options are available.
Locks the buttons and the functions on the AT-50A.
Locks the buttons* on the local remote controllers.
* ON/OFF, Mode, Set Temperature, and Filter Reset buttons
Limits the operation mode selection.
Selects the display formats* on the Home and Menu screens.
* Display language, temperature unit, display or non-display
of room temperature and Cooling/Heating mode icons
(during Auto mode), and backlight timer, and group names.
Assigns the functions to the F1 and F2 buttons.
* Setback, Schedule, Mode, Temperature Correction, and RC
Prohibition can be assigned.
Sets the sound volume and screen brightness.
Calibrates the touch panel.
Displays errors and filter signs.
Selects the System-Changeover* setting.
* Automatically switches the entire system to Cooling or
Heating based on the room temperature and the preset
temperature of each group.
* This function cannot be used when the Operation Mode
Selection Limit function is used.
P26
P38
P41
P42
P44
P46
P48
P50
P54
P55
P56
P57
P59
25