Related Manuals for KleenRite 70000 –XVAC Pile Lifter
Summary of Contents for KleenRite 70000 –XVAC Pile Lifter
- Page 1 ® 70000 XVAC Pile Lifter Model No.: Operator and Parts Manual 70000 –XVAC Pile Lifter KLEENRITE 1122 MAPLE STREET MADERA CA 93637 U.S.A. MNL70000 FAX: 1-559-673-5725 Rev. 00 (03-06) CUSTOMER SERVICE: 1-800-241-4865...
-
Page 2: Table Of Contents
© Kleenrite Printed in U.S.A. distributor or directly from Kleenrite. Kleenrite Equipment is a registered United States trademark This machine will provide excellent service, however, the best results will be obtained at minimum costs if: • The machine is operated with reasonable care. -
Page 3: Safety Precautions
OPERATION – Do not pull pile lifter by plug or cord. SAFETY PRECAUTIONS – Do not pull cord around sharp edges or corners. – Do not unplug by pulling on cord. This machine is intended for commercial use. It is Do not stretch cord. -
Page 4: Machine Components
OPERATION MACHINE COMPONENTS Power “On / Off” Lever Handle Grip Power Cord Vacuum Bag Handle Height Adjustment Lever Vacuum Bag Attachment Coupler Lifting Hand Hold PILE LIFTER SETUP 1. Carefully check carton for signs of damage. 3. Hang the hook at the top of the plastic elbow on Report damages at once to carrier. -
Page 5: Pile Lifter Operation
OPERATION FOR SAFETY: Do not operate pile lifter unless PILE LIFTER OPERATION cord is properly grounded. 4. Zip cloth vacuum bag shut and attach bag to vacuum outlet at the base of the pile lifter (Figure FOR SAFETY: Do not operate pile lifter unless operator manual is read and understood. -
Page 6: Maintenance
Coil cord neatly after use. 2. Clean sand out of sand trap. 3. Replace paper vacuum bag with genuine Hepa Kleenrite replacement bag #40054. They are available in packages of 3. Contact you distributor or Kleenrite at 800 2414865... -
Page 7: Specifications
OPERATION SPECIFICATIONS Model 70000 LENGTH 476 mm (18.75in) WIDTH 489 mm (19.25 in) HEIGHT 1130 mm (44.5 in) WEIGHT 33.1 Kg (73 lbs) VACUUM MOTOR 120V, 3.0A, 360W BRUSH MOTOR 120V, 7.8A, 936W TOTAL POWER CONSUMPTION 120V, 10A, 1200W POWER CORD 15.2m (50 ft) 3/12 70000 (03-06) -
Page 8: Electrical Diagram
ELECTRICAL DIAGRAM 70000 120V WIRING HARNESS DIAGRAM Brush Motor Vacuum T5 WHT Motor 70000 (03-06) -
Page 9: Parts List
PARTS LIST 70000 (OPT) 70000 (03-06) - Page 10 PARTS LIST 70000 Part # Description Part # Description 40050 CLOTH VACUUM BAG COMP ASSM XVAC C-14.7 PULLEY, PRGP GTZ 20TH X 1/2BR, 1/8K 40051 CLOTH VACUUM BAG XVAC C-15.5 RIVIT,POP 1/8-5/16 SS • 40054 PAPER VAC BAG XVAC – PACKAGE OF 3 C-15.75 RIVIT, PUSH NYLON 40055...
- Page 11 PARTS LIST 70000 70000 (03-06)
- Page 12 PARTS LIST 70000 Part # Description Part # Description B-01 4-40 X 1/4 PHXSS K-09.65 CORD 50' 14/3 SJT YELLOW • K-21.4 B-11.5 6-32 X 1 PHXZINC SWITCH, OMRON MOMENTARY SPDT SWITCH B-14.6 NUT, 6-32 HEX ZINC NYLOK M-0890 SWITCH, MOUNT PLATE XVAC B-16.2 8-32 X 3/8 PHXSS M-0891...
-
Page 13: Warranty Policy
Kleenrite can inspect the part that is suspected to be faulty or have a chance to repair it, Kleenrite will ship the requested part on a COD basis (part plus freight) or if credit has been established prior to the request the part will be shipped on an Open Account basis (part plus freight). - Page 14 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
- Page 15 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.