KleenRite 36433P3 Operator And Parts Manual
  1. Manuals
  2. Brands
  3. KleenRite Manuals
  4. Vacuum Cleaner
  5. 36433P3
  6. Operator and parts manual

KleenRite 36433P3 Operator And Parts Manual

Carpet and upholstery cleaner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
36433P3
Carpet And Upholstery Cleaner
Model No.:
Operator and Parts Manual
36433P3 – 11 gal Extractor
KLEENRITE
1122 MAPLE STREET
MADERA, CA 93637
FAX: 1559-673-5725
MNL36433P3
CUSTOMER SERVICE: 1-800-241-4865
Rev. 00 (6-09)

Advertisement

Table of Contents
loading

Related Manuals for KleenRite 36433P3

Summary of Contents for KleenRite 36433P3

  • Page 1 ® 36433P3 Carpet And Upholstery Cleaner Model No.: Operator and Parts Manual 36433P3 – 11 gal Extractor KLEENRITE 1122 MAPLE STREET MADERA, CA 93637 FAX: 1559-673-5725 MNL36433P3 CUSTOMER SERVICE: 1-800-241-4865 Rev. 00 (6-09)

  • Page 2: Table Of Contents

    © Kleenrite Printed in U.S.A. distributor or directly from Kleenrite. Kleenrite is a registered United States trademark This machine will provide excellent service. However, the best results will be obtained at minimum costs if:  The machine is operated with reasonable care.

  • Page 3: Safety Precautions

    Keep cord away from heated surfaces. – Report machine damage or faulty operation immediately. – Follow mixing and handling instructions on GROUNDING chemical containers. – Connect hoses before turning on pump. – Be sure chemicals are safe and non-toxic. 36433P3 (06-09)

  • Page 4: Machine Components

    Fig. 1 2. Connect hoses and tool to be used (Figure1). 3. Using a clean bucket or hose, fill solution tank with 41 liters (11 gallons) of hot water, 60° C (140° F) maximum (Figure 2). Fig. 2 36433P3 (06-09)

  • Page 5: Machine Operation

    1. Connect accessory tool hoses to the couplers at the end of the hoses already attached to the machine. (Figure 7). CLEANING CARPETS 1. Turn immersion heater to “clean” position and activate vacuum, pump, and heater switches. (Figure 5). Fig. 7 Fig. 4 Fig. 5 36433P3 (06-09)

  • Page 6: Draining Tanks

    2. Turn on vacuum and pump for 15 seconds. This will fill the pump and hoses with air and prevent Fig. 9 freezing. 3. Rinse tank with clean water at the end of the day. 3. Replace empty-out nozzle to its storage place. 36433P3 (06-09)

  • Page 7: Machine Maintenance

    3. Inspect cord and cord grip for damage. Replace immediately if damaged. 4. Lubricate metal shaft on recovery tank drain with water resistant oil. 5. Lubricate female hose couplers with lightweight oil. 36433P3 (06-09)

  • Page 8: Trouble Shooting

    Plugged spray tips. Clean or replace tips. Improper spray tip size or spray angle. Replace with proper tips. Worn spray tips. Replace spray tips. Solution tank low or empty. Refill solution tank. Faulty solution pump. Contact Service Center. 36433P3 (06-09)

  • Page 9: Specifications

    POWER CORDS 1 @ 7.6m (25 ft) 3/12 DECIBEL RATING 3 METERS (10 FT) FROM <74 db(A) MACHINE ON CARPET MACHINE DIMENSIONS 1016 mm 902 mm (40 in) (35.5 in) 450 mm 711 mm (17.7 in) (28 in) 36433P3 (06-09)

  • Page 10: Electrical Diagram

    ELECTRICAL DIAGRAM 36433P3 120 V WIRING DIAGRAM 36433P3 (06-09)

  • Page 11: Parts List

    PARTS LIST 36433P3 TANK GROUP 36433P3 (06-09)
  • Page 12 NIPPLE, 1/4 NPT CLOSE BR SK-26.8 THRMST,SWTCH ACTN SPST W/PUSHON ENDS E-14.65 CUFF, 1 1/2 SLIP X 1 1/2 HOSE SK-85E/HNDL HARNESS, HNDL C1P/CPVH G-03.19 O-RING,VITON 2-020 BLKHD SM-0880 TANK, SOL SS FAB W/STUDS J-48GRANITE LID, SOLUTION GRYGRANITE  RECOMMENDED STOCK ITEMS 36433P3 (06-09)
  • Page 13 PARTS LIST 36433P3 BASE GROUP 36433P3 (06-09)
  • Page 14 BLOWER,3STG 120 5.7W/PLUG ECO  SL-23.71 D-48.5 TEE,STREET 1/4 NPT BRASS PUMP, AQT 170 PSI W/PLG 120V D-93.4 VALVE,PRESSURE REL 1/4 SS SM-0277.4 EXCH,HT 110V 1000W E-14 CUFF, 1 1/2 SLIP X 1 1/4 HOSE SR-08/6 INSULATION,HTR  RECOMMENDED STOCK ITEMS 36433P3 (06-09)

  • Page 15: Options

    "U"CLAMP,SUPP HOE HNDL EC C-07.9 GRIP, FLRTOOL 1 1/2 X 6 M-19.5 WAND,FLOORTOOL COMP. ECONO D-15.2 45 ST ELBOW 1/4 NPT SC-82 TRIGGER,COMP KNGSTN VALVE D-41 NIPPLE, 1/4 NPT CLOSE BR SE-06.7/47 HOSE,1/4 SOL 47"FLRTL ECO  RECOMMENDED STOCK ITEMS 36433P3 (06-09)
  • Page 16 "U"CLAMP,SUPP HOE HNDL EC D-41 NIPPLE, 1/4 NPT CLOSE BR M-20 WAND,"S"BND FLTL COM W/HD  F-09 Q/C 1/4" PLUG BR SHUT OFF SC-82 TRIGGER,COMP KNGSTN VALVE G-23 VALVE,KNGSTN STD "S" BEND SE-06.7/39.2 HOSE,1/4"SOL BLU X39.25DB  RECOMMENDED STOCK ITEMS 36433P3 (06-09)
  • Page 17 Q/C 1/4" PLUG BR SHUT OFF SG-04.5 STEM ASM 4"TOOL BUNA W/BRASS CAP G-04.5 GUIDE, VALVE STEM HEX BRASS SJ-60 HANDLE ASM, 4" DETAIL TOOL G-05.5 STEM, VALVE SS 4" DETAIL TOOL SJ-62 VALVE,NYLON COMPLETE STD 4"DETAIL G-08.5 SPRING, VALVE 4" UPH TOOL 36433P3 (06-09)

  • Page 18: Warranty Policy

    Kleenrite can inspect the part that is suspected to be faulty or have a chance to repair it, Kleenrite will ship the requested part on a COD basis (part plus freight) or if credit has been established prior to the request the part will be shipped on an Open Account basis (part plus freight).
  • Page 19 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
  • Page 20 Purchased From (Distributor) 36433P3 (06-09)
  • Page 21 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
  • Page 22 Purchased From (Distributor) 36433P3 (06-09)

Table of Contents