KleenRite 36465D3-1 Operator And Parts Manual

Carpet and upholstery cleaner

Advertisement

Quick Links

®
36465D3-1
Carpet And Upholstery Cleaner
Operator and Parts Manual
Model No.:
36465D3-1 – 11 gal Extractor
KLEENRITE
1122 MAPLE STREET
MADERA CA 93637 U.S.A.
FAX: 1-559-673-5725
MNL36465D3-1
CUSTOMER SERVICE: 1-800-241-4865
Rev. 00 (08-06)

Advertisement

Table of Contents
loading

Summary of Contents for KleenRite 36465D3-1

  • Page 1 ® 36465D3-1 Carpet And Upholstery Cleaner Operator and Parts Manual Model No.: 36465D3-1 – 11 gal Extractor KLEENRITE 1122 MAPLE STREET MADERA CA 93637 U.S.A. FAX: 1-559-673-5725 MNL36465D3-1 CUSTOMER SERVICE: 1-800-241-4865 Rev. 00 (08-06)
  • Page 2: Table Of Contents

    © Kleenrite Printed in U.S.A. distributor or directly from Kleenrite. Kleenrite Equipment is a registered United States trademark This machine will provide excellent service. However, the best results will be obtained at minimum costs if: • The machine is operated with reasonable care.
  • Page 3: Safety Precautions

    Keep cord away from heated surfaces. – Report machine damage or faulty operation immediately. – Follow mixing and handling instructions on GROUNDING chemical containers. – Connect hoses before turning on pump. Be sure chemicals are safe and non-toxic. – 36465D3-1 (08—06)
  • Page 4: Machine Components

    FOR SAFETY: When using machine, follow mixing and handling instructions on chemical containers. Fig. 1 3. Using a clean bucket or hose, fill solution tank with 41 liters (11 gallons) of hot water, 60° C (140° F) maximum (Figure 2). Fig. 2 36465D3-1 (08-06)
  • Page 5: Machine Operation

    1. Connect accessory tool hoses to the couplers at exchanger. (Figure 4). the end of the hoses already attached to the machine. (Figure 7). CLEANING CARPETS 1. Turn on vacuum and pump switches (Figure 5). Fig. 4 Fig. 5 36465D3-1 (08—06)
  • Page 6: Draining Tanks

    2. Turn on vacuum and pump for 15 seconds. This will fill the pump and hoses with air and prevent Fig. 9 freezing. 3. Replace empty-out nozzle to its storage place. 3. Rinse tank with clean water at the end of the day. 36465D3-1 (08-06)
  • Page 7: Machine Maintenance

    3. Inspect cord and cord grip for damage. Replace immediately if damaged. 4. Lubricate metal shaft on recovery tank drain with water resistant oil. 5. Lubricate female hose couplers with lightweight oil. 36465D3-1 (08—06)
  • Page 8: Trouble Shooting

    Plugged spray tips. Clean or replace tips. Improper spray tip size or spray angle. Replace with proper tips. Worn spray tips. Replace spray tips. Solution tank low or empty. Refill solution tank. Faulty solution pump. Contact Service Center. 36465D3-1 (08-06)
  • Page 9: Specifications

    POWER CORDS 2 @ 7.6m (25 ft) 3/12 DECIBEL RATING 3 METERS (10 FT) FROM <68 db(A) MACHINE ON CARPET MACHINE DIMENSIONS 1016 mm 902 mm (40 in) (35.5 in) 711 mm 450 mm (28 in) (17.7 in) 36465D3-1 (08—06)
  • Page 10: Electrical Diagram

    ELECTRICAL DIAGRAM 36465D3-1 120 V WIRING DIAGRAM 36465D3-1 (08-06)
  • Page 11: Parts List

    PARTS LIST 36465D3-1 TANK GROUP 36465D3-1 (08—06)
  • Page 12 COMP,VAC FLTR NECK ASSM EDGE 3 D-01.94 BULKHEAD,ADAPT3/8NPTX1/2N SJ-49.5GRYGRNT LID COMPLETE EDGE 3-GREY GRANITE F-02 Q/C 1/8" PLUG SS SK-09.8 CORD,PIG TAIL EDGE COMP. F-03 Q/C 1/8 SOC BR ST TH SK-85K/HNDL HARNESS,HNDL EDGE C2LH CI C1PFVV • RECOMMENDED STOCK ITEMS 36465D3-1 (08-06)
  • Page 13 PARTS LIST 36465D3-1 BASE GROUP 36465D3-1 (08—06)
  • Page 14 NIPPLE, 1/4 X 2.5 BRASS PUMP, 500PSI CMP 110V D-45.5 PLUG, 3/8" MPT BRASS SM-0277.1 EXCHG,HT EDGE 110V 1750 D-48.1 TEE,1/4 NPT BRASS SR-08/6 INSULATION,HTR EDGE D-48.2 TEE,3/8 NPT BRASS E-04.6 HOSE,1/4" PULSE W/SWVL • RECOMMENDED STOCK ITEMS 36465D3-1 (08-06)
  • Page 15: Options

    "U"CLAMP,SUPP HOE HNDL EC D-15.2 45 ST ELBOW 1/4 NPT M-19.5J WAND,FLOORTOOL COMP. ZOAH • D-30.4 FILTER & CHECK, 100 MESH SC-82 TRIGGER,COMP KNGSTN VALVE D-41 NIPPLE, 1/4 NPT CLOSE BR SE-06.7/47 HOSE,1/4 SOL 47"FLRTL ECO • RECOMMENDED STOCK ITEMS 36465D3-1 (08—06)
  • Page 16: Warranty Policy

    Kleenrite can inspect the part that is suspected to be faulty or have a chance to repair it, Kleenrite will ship the requested part on a COD basis (part plus freight) or if credit has been established prior to the request the part will be shipped on an Open Account basis (part plus freight).
  • Page 17 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
  • Page 18 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.

Table of Contents