KleenRite 36448AE3 Operator And Parts Manual
  1. Manuals
  2. Brands
  3. KleenRite Manuals
  4. Vacuum Cleaner
  5. 36448AE3
  6. Operator and parts manual

KleenRite 36448AE3 Operator And Parts Manual

Carpet and upholstery cleaner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
36448AE3
Carpet And Upholstery Cleaner
Model No.:
Operator and Parts Manual
36448AE3 – 11 gal Extractor
KLEENRITE
1122 MAPLE STREET
MADERA CA 93637 U.S.A.
FAX: 1-559-673-5725
MNL36448AE3
CUSTOMER SERVICE: 1-800-241-4865
Rev. 00 (04-05)

Advertisement

Table of Contents
loading

Related Manuals for KleenRite 36448AE3

Summary of Contents for KleenRite 36448AE3

  • Page 1 ® 36448AE3 Carpet And Upholstery Cleaner Model No.: Operator and Parts Manual 36448AE3 – 11 gal Extractor KLEENRITE 1122 MAPLE STREET MADERA CA 93637 U.S.A. FAX: 1-559-673-5725 MNL36448AE3 CUSTOMER SERVICE: 1-800-241-4865 Rev. 00 (04-05)

  • Page 2: Table Of Contents

    © Kleenrite Printed in U.S.A. distributor or directly from Kleenrite. Kleenrite Equipment is a registered United States trademark This machine will provide excellent service. However, the best results will be obtained at minimum costs if: • The machine is operated with reasonable care.

  • Page 3: Safety Precautions

    Keep cord away from heated surfaces. Report machine damage or faulty operation – immediately. Follow mixing and handling instructions on – GROUNDING chemical containers. – Connect hoses before turning on pump. – Be sure chemicals are safe and non-toxic. 36448AE3 (04—05)

  • Page 4: Machine Components

    FOR SAFETY: When using machine, follow mixing and handling instructions on chemical containers. Fig. 1 3. Using a clean bucket or hose, fill solution tank with 41 liters (11 gallons) of hot water, 60° C (140° F) maximum (Figure 2). Fig. 2 36448AE3 (04-05)

  • Page 5: Machine Operation

    CLEANING CARPETS machine. (Figure 7). 1. Activate vacuum, pump, and heater switches and turn preheat valve to “clean” position (Figure 5). Do not adjust pump pressure over 20 bar (300psi). Fig. 7 Fig. 4 Fig. 5 36448AE3 (04—05)

  • Page 6: Draining Tanks

    2. Turn on vacuum and pump for 15 seconds. This will fill the pump and hoses with air and prevent Fig. 9 freezing. 3. Replace empty-out nozzle to its storage place. 3. Rinse tank with clean water at the end of the day. 36448AE3 (04-05)

  • Page 7: Machine Maintenance

    3. Inspect cord and cord grip for damage. Replace immediately if damaged. 4. Lubricate metal shaft on recovery tank drain with water resistant oil. 5. Lubricate female hose couplers with lightweight oil. 36448AE3 (04—05)

  • Page 8: Trouble Shooting

    Plugged spray tips. Clean or replace tips. Improper spray tip size or spray angle. Replace with proper tips. Worn spray tips. Replace spray tips. Solution tank low or empty. Refill solution tank. Faulty solution pump. Contact Service Center. 36448AE3 (04-05)

  • Page 9: Specifications

    POWER CORDS 2 @ 7.6m (25 ft) 3/12 DECIBEL RATING 3 METERS (10 FT) FROM <73 db(A) MACHINE ON CARPET MACHINE DIMENSIONS 1016 mm 902 mm (40 in) (35.5 in) 711 mm 450 mm (28 in) (17.7 in) 36448AE3 (04—05)

  • Page 10: Electrical Diagram

    ELECTRICAL DIAGRAM 36448AE3 120 V WIRING DIAGRAM 36448AE3 (04-05)

  • Page 11: Parts List

    PARTS LIST 36448AE3 TANK GROUP 36448AE3 (04—05)
  • Page 12 Q/C 1/8" PLUG SS SJ-49.5GRYGRNT LID COMPLETE EDGE 3-GREY GRANI F-03 Q/C 1/8 SOC BR ST TH SK-09.8 CORD,PIG TAIL EDGE COMP. F-11 Q/C 1/4" SOC BR SHUT OFF SK-86A/HNDL HARNESS, HNDL EDGE C2H CI C1VP • RECOMMENDED STOCK ITEMS 36448AE3 (04-05)
  • Page 13 PARTS LIST 36448AE3 BASE GROUP 36448AE3 (04—05)
  • Page 14 HOSE,1/4" PULSE W/SWVL PUMP,300PSI 1/4HP AC CMP 110V110CA E-14 CUFF, 1 1/2SLIP X 1 1/4HOSE SM-0277.1 EXCHG,HT EDGE 110V 1750 F-09 Q/C 1/4" PLUG BR SHUT OFF SR-08/6 INSULATION,HTR EDGE G-25.15 VALVE, BALL 2-WAY 1/4"FPT RECOMMENDED STOCK ITEMS • 36448AE3 (04-05)
  • Page 15 MOTOR,300PSI AC CMP 220V 110CAM 60HZ SL-28.450MTRCE MOTOR,300PSI AC CMP 220V 125CAM 50HZ SL-28/KIT-A PUMPTEC KIT,PLUNGER & SEAL SL-28/KIT-B PUMPTEC KIT/VALVE & O-RING SL-28/KIT-C PUMPTEC KIT- 110CAM & BEARING SL-28/KIT-E PUMPTEC KIT-116CAM & BEARING SL-28/KIT-F PUMPTEC KIT-125CAM & BEARING • RECOMMENDED STOCK ITEMS 36448AE3 (04—05)

  • Page 16: Options

    "U"CLAMP,SUPP HOE HNDL EC D-41 NIPPLE, 1/4 NPT CLOSE BR M-20 WAND,"S"BND FLTL COM W/HD • F-09 Q/C 1/4" PLUG BR SHUT OFF SC-82 TRIGGER,COMP KNGSTN VALVE G-23 VALVE,KNGSTN STD "S" BEND SE-06.7/39.2 HOSE,1/4"SOL BLU X39.25DB • RECOMMENDED STOCK ITEMS 36448AE3 (04-05)
  • Page 17 Q/C 1/4" PLUG BR SHUT OFF SG-04.5 STEM ASM 4"TOOL BUNA W/BRASS CAP G-04.5 GUIDE, VALVE STEM HEX BRASS SJ-60 HANDLE ASM, 4" DETAIL TOOL G-05.5 STEM, VALVE SS 4" DETAIL TOOL SJ-62 VALVE,NYLON COMPLETE STD 4"DETAIL G-08.5 SPRING, VALVE 4" UPH TOOL 36448AE3 (04—05)

  • Page 18: Warranty Policy

    Kleenrite can inspect the part that is suspected to be faulty or have a chance to repair it, Kleenrite will ship the requested part on a COD basis (part plus freight) or if credit has been established prior to the request the part will be shipped on an Open Account basis (part plus freight).
  • Page 19 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
  • Page 20 36448AE3 (04-05)
  • Page 21 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.

Table of Contents