Initial Camera Settings - Ikelite Digital Housing Supplemental Instructions

Initial Camera Settings

- Insert a fully charged battery. Due to the power required to operate the
camera and LCD screen, start each dive with a fully charged camera
battery.
- Slide Mode Dial to "A" Aperture Priority and set Aperture to F2.0.
- Set Flash to "Fill In" .
- In MENU:
Set Compression to "Fine."
Set AF Mode to "Spot.".
Set ESP/
Set Digital Zoom to "Off" and Image Stabilizer to "On."
Set AF Illuminat. to "Off." A strobe focusing light is recommended to
assist AF underwater if needed.
Set Rec View to "3sec."
Set Image Size to "1080p."
Set IS Movie Mode to "On."
In Memory Format select "Yes" OR in Erase, set to "All Erase." If you
have previous images you wish to keep, ignore this setting.
In Custom Mode Setup, select "Set."
Set Power On to "Yes."
Set the Date and Time.
In Tough Settings, set LED Illuminator to "On."
- Press the OK Button to enter additional MENU Settings:
Set White Balance to Auto "WB/AUTO or underwater." For best results,
set to Custom "One Touch 1
Set ISO to "200."
Set Shooting Image to "Single."
Set Image Quality to "16m" and Picture Ratio to "4:3."
- If overexposure occurs when shooting a close-up subject, Adjust
Aperture setting to F8.0, back away from the subject and zoom in,
and/or use "-"
- Camera functions not mentioned should be set to user's desired setting.
4
(before placing camera in housing)
to .
exposure compensation.
." Reset for each working depth.