Philips LX9000R Service Manual page 51

DVIO 1.8 Error Codes
Error Code Id
0 0x00 DVIOC_ERR_DDS_OK
6 0x06 DVIOC_ERR_DDS_UNKNOWN
17 0x11 DVIOC_ERR_DDS_TNF_1
18 0x12 DVIOC_ERR_DDS_TNF_2
23 0x17 DVIOC_ERR_DDS_TNF_7
38 0x26 DVIOC_ERR_DDS_TNF_16
39 0x27 DVIOC_ERR_DDS_TNF_17
48 0x30 DVIOC_ERR_DDS_UPINTRAM
A
50 0x32 DVIOC_ERR_DDS_UPEXTRA
MA
51 0x33 DVIOC_ERR_DDS_UPEXTRA
MD
58 0x3A DVIOC_ERR_DDS_ROMCHK
244 0xF4 DVIOC_ERR_LINK_HWPHY
245 0xF5 DVIOC_ERR_LINK_HWLINK
5.5 Loop tests
The following loops can be distinguished:
• Loops performed on the digital board only
• User Dealer loops performed on the digital and analogue
board
• System loops performed via an external connection:
outputs are looped back to the inputs.
Diagnostic Software DVD
Description
No Error
Unknown Error(including UART communication
error)
Link chip incorrect responding
No link register access or link reset failed
Link reset failed
Expecting no 1394 node with GUID connectivity,
while detecting connection
Expecting 1394 node with GUID connectivity, while
not detecting connection
Internal ram problem in address lines
External ram problem in address lines
External ram problem in data lines
Checksum of codespace 0x0000-0x1f80, 0x2000-
0xeffd is not correct
PHY chip not responding(PHY down report received)
LINK chip not responding
LX9000R 5.
Hardware
µPD72893, Link
µPD72893, Link
µPD72893, Link
µPD78F0988,
Wrapper
µPD4564163G5,
SDRAM
µPD4564163G5,
SDRAM
µPD78F0988,
Wrapper
µPD72852, Phy
µPD72893, Link
EN 51