Philips LX9000R Service Manual page 33

STEP DESCRIPTION
19 The local display shows BEWRITE READ. Press PLAY to start the test.
Press STOP to skip this nucleus.
20 The local display shows BETRAY OPEN. Press PLAY to start the test.
Press STOP to skip this nucleus.
21 The local display shows BETRAY CLOSE. Press PLAY to start the test.
Press STOP to skip this nucleus.
22 The local display shows READ ERRORLOG. Press PLAY to start the test.
Press STOP to skip this nucleus.
If the player test succeeded, the user/dealer script will start in an endless loop.
If the player test failed, the local display will display FAIL and the error code
Remark
In case of a failure, the display shows " FAIL XXXXXX ". The
description of the shown error code can be retrieved in the
survey of Nuclei Error Codes (paragraph 5.4). Once an error
occurs, it is not possible to continue the player script. Unplug
the set and restart the player script. By pressing the STOP key,
it is possible to jump over the failure and to continue the player
script.
Diagnostic Software DVD
DVD PLAYER TEST
(script)
To start the DVD Player test
hold Open/Close & PLAY
buttons depressed
while plugging mainscord in.
Press 7x STOP
to skip general set tests
not applicable for LX9000R
DIGITAL BOARD &
A/V BOARD
TEST
BASIC ENGINE
TEST
Figure 5-2
LX9000R 5.
NUCLEUS
617
616
615
633
EN 33