The G10 Phono Pre-Amplifier - T+A G10 User Manual

The phono pre-amplifier installed in the G10 is ad-
justed correctly at the factory to suit the pick-up
system installed.
If you wish to fit a different pick-up system, the pre-
amplifier can be adjusted to suit the new system by
means of miniature code switches which are acces-
sible via openings in the metal base plate. The pre-
amplifier supplied with the C10 pick-up system is a
pure MC pre-amplifier. The pre-amplifier supplied
with the C05 system is suitable for high-level MC
systems and MM pick-ups.
Empfindlichkeit
Sensitivity
Eingangsimpedanz /
Eingangskapazität
Input Impedance /
Capacitance
Abb.1: G10, underside view
The values for input impedance and input sensitivity are shown in the following tables.

The G10 PHONO pre-amplifier

VORN
FRONT
S2
S1
BODENBLECH
BOTTOM COVER
HINTEN
REAR
The position of the code switches is shown in the
diagram below.
1 2 3 4
1 2 3 4
1 2 3 4 1 2 3 4
32
S52
S51