Operating Elements And Connections Of The External Warning Indicators - Omnitronic SPL-1 User Manual

4.2 Display elements and connections of the external warning indicators
This section describes the wall indicator as a reference. Illustrations and features of the rack indicator are
comparable.
13 Warning indicators
These three-color indicators have the same function as
the indicators of the SPL limiter. If muting is selected on
the limiter, the indicators light consecutively as soon as
the level is exceeded to warn of impeding muting of the
outputs.
14 Signal inputs/feed-through outputs
RJ45 jacks, connected in parallel, for connecting the SPL
limiter or further warning indicators via standard network
cables (not included). Each jack may be used as signal
input or feed-through output. Three warning indicators
can be connected in series. The connectors of the rack
indicator are located on the rear panel.
24/30 00051963.DOC, Version 1.0