Control Elements And Connections; Connecting A Computer - Omnitronic PAD-12 User Manual

3. CONTROL ELEMENTS AND CONNECTIONS

1 Trigger pads
Transmit control change messages or note
messages.
2 Transport buttons
There are six transport buttons: [LOOP],
[REW], [FF], [STOP], [PLAY] and [REC].
These buttons transmit control change
messages or MMC messages (MIDI machine
control).
3 Freely assignable buttons
Transmit control change messages or note
messages.
4 BANK button
For switching between scenes. You can save
the parameter assignments for the MIDI
controller as scenes. The unit offers 4 scenes
which can be edited with the software editor.

4. CONNECTING A COMPUTER

Use the included USB cable to connect the
PAD-12 to a USB 2.0 port on your computer.
The power will turn on and the scene LED will
light up.
When you first connect the MIDI controller to your
computer, the standard USB MIDI driver will be
installed automatically.
5 Scene indicators
The LED of the selected scene will light up.
6 USB port
For connecting a computer. The MIDI
controller sends and receives MIDI data via
the USB connection and is supplied with
power.
7 Fader
Adjusts the master volume. This control cannot
be edited.
Now select the PAD-12 as MIDI controller within
your music software and you are ready to go!
9/12 00068740.DOC, Version 1.0