Specification - Hitachi UC 18YRSL Handling Instructions Manual

English

SPECIFICATION

CHARGER
Model
Charging time
Charging voltage
Weight
NOTE: The recharging time may vary according to the ambient temperature.
APPLICATION
For charging the HITACHI BATTERY.
○ BSL1430, BSL1830
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red. (At 1-second
intervals).
Table 1
Before
charging
The pilot While
charging
lamp
lights or
Charging
blinks in
complete
red.
Charging
impossible
The pilot Overheat
standby
lamp
lights in
green.
(2) Regarding the temperature of the rechargeable
battery.
The temperatures for rechargeable batteries are
as shown in the Table 2, and batteries that have
become hot should be cooled for a while before being
recharged.
Table 2
Rechargeable batteries
BSL1430, BSL1830
(3) Regarding recharging time
Table 3 shows the recharging time required according
to the type of battery.
4
Indications of the pilot lamp
Blinks Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Lights Lights continuously
Blinks Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Flickers Lights for 0.1 seconds. Does not light for
0.1 seconds. (off for 0.1 seconds)
Lights Lights continuously
Temperatures at which the
battery can be recharged
0°C — 50°C
UC18YRSL
Approx. 45 minutes (at 20°C)
14.4 V 18 V
0.6 kg
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line is
visible, as shown in Fig. 1, 2.
3. Charging
When inserting a battery in the charger, the charge
status lamp will light up continuously in red.
When the battery becomes fully recharged, the
pilot lamp will blink in red. (At 1-second intervals.)
(See Table 1)
(1) Lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
Table 3 Recharging time (approx. min.) at 20°C
Battery capacity (Ah)
Battery
Voltage
BSL1430
14.4 V
(8 cells)
BSL1830
18 V
(10 cells)
NOTE: The recharging time may vary according to the
ambient temperature.
4. Disconnect the charger's power cord from the
receptacle.
5. Hold the charger fi rmly and pull out the battery.
NOTE
Be sure to pull out the battery from the charger after
use, and then keep it.
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Li-ion BATTERY
3.0 Ah
45 min.
45 min.