ZyXEL Communications COMET 336 User Manual page 41

Command Options
*Qn
*Q0
*Q1
*Q2 *
*Q3
#CID=n
N=0
N=1
N=2
-SDR=n N=0
N=1
N=2
N=3
N=4
N=5
N=6
N=7
Fax commands are located in Chapter 8 of the ZyCD edition of the Comet 336 User's
Manual.
Voice commands are located in Chapter 9 of the ZyCD edition of the Comet 336 User's
Manual.
34 AT Command Set Summaries
Function & Description
(hang-up).
Action taken when line quality changes.
No action to poor signal quality.
Retrain action taken if signal quality is poor.
Adaptive rate, automatic fall-back or forward.
Disconnect if signal quality is poor.
Enable or disable Caller ID.
Disable CID
Enable CID w/ formatted presentation to the DTE.
Enable CID w/ unformatted presentation to the DTE.
Disables Distinctive Ring. Any valid ring detected is
reported as RING (default).
Enables Distinctive Ring Type 1
Enables Distinctive Ring Type 2
Enables Distinctive Ring Type 1 and 2
Enables Distinctive Ring Type 3
Enables Distinctive Ring Type 1 and 3
Enables Distinctive Ring Type 2 and 3
Enables Distinctive Ring Type 1, 2, and 3
Ref.
S27.6-7