ZyXEL Communications COMET 336 User Manual page 69

n=1
n=2
n=3
n=4
n=5
n=6
n=7
n=8
n=9
#VRA
#VRN
#VRX
#VSD
n=0,1
#VSK n=255
62 Voice Operation
Route only the handset through the modem.
Can be chosen before recording a greeting
message.
route only the speaker through the modem.Can
be chosen before playing back any message.
only the auxiliary input device (microphone)
should be routed through the modem. Can be
chosen before recording a greeting message.
the same as #VLS =0, except that the modem
enables the internal speaker as well as the
telephone line/handset circuit.
selects telephone emulation mode while in
#CLS=8 mode. Speakerphone operation is
entered during Voice On-line (VCON) mode
after completing dialing (ATD) or answering
(ATA).
Selects speakerphone mode while in #CLS=8
mode. Telephone emulation operation is
entered during Voice On-line (VCON) mode
after completing dialing (ATD) or answering
(ATA).
valid after Voice On-line mode, mutes the
local handset by switching the handset or
speakerphone out of the telephone line path if
in #VLS=0 or #VLS=6 mode.
Valid after Voice On-line mode. Engages the
Caller ID relay to allow recording of
conversation when using a handset by routing
the signal to the audio codec (if populated).
Routes the handset to the sound codec to
allow recording/playback of audio through
the local handset.
Ringback goes away timer (originate).
n=0-255 (0 - 2.55 sec), default:70
Ringback never came timer (originate).
n=0-255 (0 - 2.55 sec), default:100
Voice receive mode.
Enable silence deletion (no function,
command response only).
Provide no function other than command
respond compatibility.
Buffer skid setting.