Assembly / Installation Instructions - HAMPTON BAY SKU 414-713 Instruction Manual

ASSEMBLY / INSTALLATION INSTRUCTIONS:

Assembly / Installation for Post Mounting:
1. Place mounting collar (D) of post lantern over
the top of 3-inch diameter pole (J) (sold
separately).
2. Tighten 3 set screws (E) against pole.
3. Alternative Securement: Remove set screws
(E) and mark hole locations with marker. Drill
holes in pole and secure mounting collar by
screwing set screws into holes drilled into pole.
4. Set switch (H) located on the bottom plate
under top cap to AUTO position and allowed to
charge a full sunny day. The AUTO position
automatically turns the unit ON at dusk.
Assembly / Installation for Surface Mounting:
1. Place mounting collar (D) of post lantern onto the
fixed 3-inch diameter pier base (K) (sold
separately).
2. Secure mounting collar (D) to pier base (K) with
3 set screws (E).
3. Alternate Securement: Refer to Step 3 of Post
Mounting instructions.
4. Set switch (H) located on the bottom plate under
top cap to AUTO position and allowed to charge a
full sunny day. The AUTO position automatically
turns the unit ON at dusk.
5.
4
H
H