Intel I440 LX User Manual page 25

IDE Secondary Slave PIO [Detect your Secondary Slave hard disk device.]
: AUTO (default)
: Mode 0,1,2,3,4
On-Chip Primary PCI IDE [Select use Chip support Primary PCI IDE.]
: Enabled (default)
: Disabled
On-Chip Secondary PCI IDE [Select use Chip support Secondary PCI IDE.]
: Enabled (default)
: Disabled
PCI slot IDE 2nd Channel [Use external IDE. AS ISA IDE or PCI IDE.]
: Enabled (default)
: Disabled
On-board FDD Controller : Enabled (default)
On-board Serial Port 1 : COM1 (default)
On-board Serial Port 2 : COM1
: COM2 (default)
: COM3
: COM4
: Disabled
On-board Parallel Port : 378H (default)
: 278H
: 3BCH
: Disabled
On-board Parallel Mode : SPP(default)
: EPP
: ECP
: ECP+EPP
USB KEYBOARD SUPPORT:
DEFAULT VALUE IS DISABLE. IF THE SYSTEM USES USB KEYBOARD,
PLEASE SET «ENABLE.» IT IS NOT NECESSARY TO SET THIS ITEM FOR
USB MOUSE. ONLY SET «ASSIGN IRQ FOR USB» (REFER TO PAGE
20).
I440LX
: Disabled
: COM2
: COM3
: COM4
: Disabled
22
Ver.6LX2