Intel I440 LX User Manual page 12

Ver.6LX2
HSS PIN (HSSPIN): 2 PCS
HSS TOP BAR (HSSTOP): 1 PC
2. MAKE SURE THAT THE POWER SUPPLY IS TURNED OFF.
3. INSERT THE RMAM UP THROUGH THE BOTTOM OF THE
MOTHERBOARD.
4. INSERT THE 2 PINS OF THE HSSPIN DOWNWARD THROUGH THE
MOTHERBOARD TO SECURE. TAKE NOTE THAT THE 2 PINS ARE OF
DIFFERENT SIZES. YOU CANNOT INSERT THE LARGER PIN INTO THE
SMALLER HOLE.
5. PUT THE RM DOWN ON SLOT ONE AND FASTEN UP THE 4 SCREWS.
TAKE NOTE THAT ONE TIP OF THE SLOT ONE HAS A SMALL
PROTRUSION, SO YOU CAN ONLY INSERT IT ONE WAY.
6. CLIP THE HSSTOP INTO THE HSSBASE.
7. INSERT THE P-II CPU ALONG THE RM INTO SLOT ONE TILL ITS TOP
CLICKS INTO THE 2 HOLES ON THE TOP OF THE RM.
8. SLIDE THE HSSTOP INTO THE HSSBASE THROUGHT THE FINS ON
THE ATX HEATSINK.
I440LX 9