Table of Contents
Advertisement
DSDA Digital Storage Disk Arrays
8.2
Maintenance
8.2.1
Disk Replacement DSA-N2B20 / DSA-N2B40 / DSA-N2B50
Follow these steps to replace a disk:
1.
2.
3.
4.
5.
8.2.2
Replacement of Modules
Documentation on the replacement of other modules is available on www.boschsecurity.com
under Product Catalog > CCTV > Digital Recording and Storage > Disk Arrays (Network
Attached).
Bosch Sicherheitssysteme GmbH
Determine the disk drive to be replaced, see Section 8.5.1 DSA-N2B20 / DSA-N2B40 / DSA-
N2B50, page 31.
Grasp and pinch the latch.
Rotate the handle to extract the disk.
Support the bottom of the drive to remove it.
Reverse these steps to replace the hard disk.
The drive LED should be lit green now.
Installation Guide
Monitoring and Maintenance | en
- | V2 | 2009.11
27
Advertisement
Table of Contents
