24
en | Adding Storage
18. On the following two screens, click Next and leave all options to their default value.
19. The changes are summarized on the Commit screen.
20. In the navigation panel, select Volumes > Snapshots > Configure.
21. Repeat steps 7 to 26 for each volume you wish to add.
- | V2 | 2009.11
On the third screen (Other), uncheck Access Time.
Click Commit to apply the new settings.
Choose the newly created volume from the drop-down list.
Uncheck Scheduled.
Click Apply to commit the change.
Installation Guide
DSDA Digital Storage Disk Arrays
Bosch Sicherheitssysteme GmbH