Adding Storage; Installing A Shelf; Setting The Shelf Id - Bosch DSA-N2B20 Installation Instructions Manual

20 en | Adding Storage
7

Adding Storage

Storage shelves can be added to the DSA-N2B20, DSA-N2B40 and the DSA-N2B50 system.
Each expansion unit comes with 14 disks, 1 TB each.
Shelves are daisy-chained in a so-called loop. The first shelf added to a storage system is
directly connected to the storage system. Each following shelf is connected to the last shelf in
the existing loop, with a maximum of six shelves in one loop for the DSA-N2B50 and the DSA-
N2B40 and a maximum of four shelves for the DSA-N2B20.
7.1

Installing a Shelf

7.1.1

Setting the Shelf ID

Each shelf will have to have an ID. The shelf ID represents the position in the loop. The first
shelf (which you attach directly to your storage system) has ID #1, the second shelf (attached
to shelf number one) has ID #2 and so on.
- | V2 | 2009.11
Physically install and secure the shelf onto support brackets and rack.
Installation Guide
DSDA Digital Storage Disk Arrays
Bosch Sicherheitssysteme GmbH