Table of Contents
Advertisement
18
en | Configuration through the Web Interface
The following procedure must be carried out for each LUN to be created.
1.
2.
3.
4.
5.
6.
7.
8.
- | V2 | 2009.11
In the navigation panel, select LUNs > Wizard.
Click Next on the LUN Wizard welcome screen.
Path: Enter /vol/vol0/lun1.
The first part of this path is always vol, the second part is the name of your volume
(vol0), the third part is the name of your LUN (change this for all further LUNs you are
creating).
Example: Enter /vol/vol0/lun2, /vol/vol0/lun3, /vol/vol0/lun4 ... for further
LUNs.
Size: Enter the size calculated for your LUNs (available size of the volume divided by the
number of LUNs to be created for this volume).
LUN Protocol Type: Select Linux.
Leave Space-reserved enabled and leave Description blank. Click Next.
On the Add Initiator Groups screen, click Add Group.
Select Use existing initiator group. Click Next.
Select the VRM_UNITIGROUP0 that you have created before. Click Next.
Installation Guide
DSDA Digital Storage Disk Arrays
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
