Sanyo VPC-CG10BK Service Manual page 20

3. AWB Adjustment
Camera
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
Adjusting method:
1. When setting the camera in place, set it to an angle so
that nothing appears in any part of the color viewer except
the white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Dsc Calibration
AWB Results:
1:
WB=277,482,453
CHECK=128,128,132
WB_ND=274,482,448
CHECK_ND=128,128,139
IRIS_LG: 23197
IRIS_LG_R1: 1644
IRIS_LG_R2: 1644
IR_TEMP_AD=384
IRIS_PWM1=208,188
IRIS_PWM2=174,162
IRIS_PWM3=153,146
IRIS_PWM4=139,133
IRIS_PWM5=120,108
MS=1479,724
MS_M=1155,1038
MS_C=946,859
MS_C2=799,752
Fno_FOR_ISO=-1
SS_FOR_ISO=-1
YLEVEL_FOR_ISO=-1
Pattern box
)
2
x
OK
Copy
-
Adjustment value determination is effectuated using the
"CHECK", "CHECK_ND", "MS", "MS_M", "MS_C", "MS_C2",
"IRIS_PWM1", "IRIS_PWM2", "IRIS_PWM3", "IRIS_PWM4" ,
"IRIS_PWM5" and "IR_TEMP_AD" values. If
CHECK= wc0, wc1, wc2
CHECK_ND= wnc0, wnc1, wnc2
MS= ms1, ms2,
MS_C= ms5, ms6,
IRIS_PWM1= s1, s2
IRIS_PWM3= s5, s6
IRIS_PWM5= s9, s10
IR_TEMP_AD= itad
the adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
wc0=128 ± 2, wc1=128 ± 2, wc2<=255
wnc0=128 ± 2, wnc1=128 ± 2, wnc2<=255
1200<=ms1<=4450, 240<=ms2<=2240, 980<=ms3<=2980,
820<=ms4<=2820, 700<=ms5<=2700, 570<=ms6<=2570,
470<=ms7<=2470, 360<=ms8<=2360
0<=s1<=255, 0<=s2<=255, 0<=s3<=255, 0<=s4<=255,
0<=s5<=255, 0<=s6<=255, 0<=s7<=255, 0<=s8<=255,
0<=s9<=255, 0<=s<=2255
ms2<ms8<ms7<ms6<ms5<ms4<ms3<ms1
s1>s2>s3>s4>s5>s6>s7>s8>s9>s10
0<itad<1023
Adjustment values other than the above are irrelevant.
4. CCD White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select "CCD Defect" on the LCD "Test", and click the "Yes".
3. After the adjustment is completed, OK will display.
4. Click the OK.
5. CCD Black Point And White Point Defect Detect
Adjustment In Lighted
Camera
-
20
MS_M= ms3, ms4,
MS_C2= ms7, ms8,
IRIS_PWM2= s3, s4
IRIS_PWM4= s7, s8
Pattern box