Sanyo VPC-CG10BK Service Manual page 19

Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_TEMP_AD_I: ATADI
ATAID: adjustment value of focus temperature A/D.
(0<ATADI<1023)
PZ_BR: PBR
PBR: adjustment value of zoom backrush pulse.
(0<=PBR<=10)
AF_BR: ABR
ABR: adjustment value of focus backrush pulse.
(0<=ABR<=10)
AF_I_WIDE: ZIW
ZIW: infinity adjustment value of focus at zoom position
wide (-55<=ZIW<=30)
AF_I_MID1: ZIM1
ZIM1: infinity adjustment value of focus at zoom position
middle1 (-80<=ZIM1<=20)
AF_I_MID2: ZIM2
ZIM2: infinity adjustment value of focus at zoom position
middle2 (-68<=ZIM2<=114)
AF_I_TELE: ZIT
ZIT: infinity adjustment value of focus at zoom position
tele (-31<=ZIT<=69)
IRIS_GAIN: g
g: adjustment value of gain (-128<=g<=127)
IRIS_OFFSET: o
o: adjustment value of offset (-128<=o<=127)
2. Lens Adjustment (1m)
Camera
Preparation:
POWER switch: ON
Adjustment condition:
Siemens star chart (A3)
Fluorescent light illumination with no flicker (incandescent
light cannot be used.)
Illumination above the subject should be 700 lux ± 10%.
100 0.5 cm
Siemens
star chart
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
Adjustment method:
1. Set the siemens star chart 100 ± 0.5 cm from lens surface
so that it becomes center of the screen (zoom wide and
tele). Set the camera and the chart in a straight, and do
not put optical systems (mirror and conversion lens etc.)
2. Double-click on the DscCalDi.exe.
3. Click the "Focus", and Click the "Yes".
4. Lens adjustment value will appear on the screen.
5. Click the OK.
DscCalDi
!
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_TEMP_AD: ATAD
ATAD: adjustment value of focus temperature A/D
(0<ATAD<1023)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(-60<=ZW<=35)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(-90<=ZM1<=20)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(-78<=ZM2<=32)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(-51<=ZT<=59)
- -
19
x
Focus Result
AF_TEMP_AD: 397
AF_WIDE: 4
AF_MID1: 18
AF_MID2: 49
AF_TELE: 122
OK