Timer Recording Using G-Code System - Sanyo HVR-DX610 Instruction Manual

Timer Recording using G-Code system

Thanks to this programming system, you no longer need to tediously enter the date, programme number, start
and end time. All the information needed by the DVD recorder for programming is contained in the G-Code
programming number. This G-Code number is found in most TV listings.
1
Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.
2
Press [TIMER].
The 'Select Record Method' menu appears.
3
Select 'G-Code' with [.../†] and confirm with [ENTER].
The 'GCode' menu appears.
Enter the entire 'G-Code' number. This number is up to 9 digits long and can
be found next to the start time of the TV programme in your TV listings
magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the 'G-Code' number.
If you make a mistake, you can clear it with [CLEAR].
4
Press [ENTER] to confirm.
5
The decoded information appears after confirmation. You can go back at any
time to change the information by pressing [ENTER]. Select the appropriate
input field using [...†]. If required, change the information using [...†].
If all the information is correct, press the [ENTER] button. The programming
information is stored in a TIMER block.
6
Press [SETUP] to exit the Timer Record List.
7
Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start
the Timer Recording.
As G-CODE is optional function, some models may not be available. If there's no G-CODE Column on "Menu" window,
G-CODE is not available.
46
Timer Recording
Select Record Method
Please choose your preferred
method for scheduling a recording.
Manual edit timer
G-Code
Instructions
Enter-Confirm Setup-Exit Move ...†
GCode
Please enter your GCode Code.
– – – – – – – – –
Instructions
Enter-Edit Setup-Exit Move ...†
Timer Recording
PR No. Date Start End Mode
PR03 01/02 13:30 14:30 HQ
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
Instructions
Enter-Edit Setup-Exit Move ...†
Edit Timer
Media
PR No. PR-03
Date Jan/02 Sun
Start 13:30
End 14:30
Mode HQ
Repeat Once
Delete
Instructions
Enter-Save Setup-Exit