Sanyo HVR-DX610 Instruction Manual page 32

8
Press [ENTER] to confirm your rating selection, then press [SETUP] to exit
the menu.
Change Password
1
While 'Preferences' is selected, press [†] to select 'Parental Controls'.
2
Press [ENTER]. The 'Parental Controls' submenu appears.
3
Use [.../†] to select 'Change Password' then press [ENTER].
4
The 'Change Password' submenu appears. Enter your current 4-digit
password.
5
Enter a new 4-digit password. Re-enter the new password to confirm, press
[ENTER].
Master Password :
•
control and then press [ENTER].
• Set the new password to something other than '0000'.
Set Parental Country Code
1
While 'Preferences' is selected, press [†] to select 'Parental Controls'. Then
press [†] to select 'Set Parental Country Code'.
2
Press [ENTER]. Enter your current 4-digit password then press [ENTER].
3
Use [.../†] to select the desired country and press [ENTER] to confirm.
30
If you forget your password, press 3,3,0,8 on the remote
Initial Setup
Parental Control
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move ...†
Parental Control
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move ...†
Change Password
Current Code * * * *
Enter New Code * * * *
Confirm Code * * _ _
Instructions
Setup-Exit
Parental Control
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move ...†
Parental Country Code
Please select Country for Parental Setup
...
Australia
†
Belgium
Denmark
Finland
France
Instructions
Enter-Confirm Setup-Exit Move ...†