Restore Defaults - Sanyo HVR-DX610 Instruction Manual

Restore Defaults

If you wish, you can reset the DVD Recorder+VCR to its original factory
settings.
1
Press [SETUP].
2
Use [œ/√] to select 'Restore Defaults'.
3
Press [ENTER].
4
The Initialize menu will appear. Use the [.../†] buttons to select
'Yes' and press [ENTER].
• Some options cannot be reset, including Parental Controls, Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock settings again.
32
Initial Setup
Restore Defaults
If you select this function all
settings will be removed and
Are you sure you want to restore
the product will be set into
default settings?
initial (factory) mode.
Yes
No
Instructions
Enter-Confirm Setup-Exit
Move ...†