Table of Contents
Advertisement
Using an AUX input
This product
AUX input
Mini-jack AV cable
(CD-RM10)
(sold separately)
Red, white
Yellow
To
video output
To audio
outputs
Notes
This mode is available when the setting
of AUX input is set to "On".
For details, refer to Starting procedure on
page 37.
When connecting an external video com-
ponent using a mini-jack AV cable, use a
separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-
RM10) (sold separately) for wiring. If you use
other cables, the wiring position might differ
resulting in disturbed images and sounds.
OK
L : Left audio (White)
R : Right audio (Red)
L
L
V : Video (Yellow)
V
G
R
R
G
V
G : Ground
Connecting an HDMI device
This product
Notes
For details concerning the operations of
HDMI device, refer to Chapter 15.
When you connect the High Speed
HDMI® Cable, use the lock tie to fix it
securely.
For details, refer to Securing the High
Speed HDMI® Cable on page 62.
Connecting the rear display
This product
Yellow (V OUT)
Rear audio
output
Mini pin plug cable
(sold separately)
RCA cables
(sold separately)
To audio
inputs
To
video input
Rear display with
RCA input jacks
(sold separately)
When using a rear display con-
nected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This product's rear video output is for con-
nection of a display to enable passengers in
the rear seats to watch the video source.
Installation
Precautions before
installation
CAUTION
Never install this product in places where, or
in a manner that:
— Could injure the driver or passengers if
the vehicle stops suddenly.
— May interfere with the driver's operation
of the vehicle, such as on the floor in
front of the driver's seat, or close to the
steering wheel or shift lever.
— To ensure proper installation, be sure
to use the supplied parts in the manner
specified. If any parts are not supplied
with this product, use compatible parts
in the manner specified after you have
the parts' compatibility checked by your
dealer. If parts other than supplied or
compatible ones are used, they may
damage internal parts of this product
or they may work loose and the product
may become detached.
— Do not install this product where it may
(i) obstruct the driver's vision, (ii) impair
the performance of any of the vehicle's
operating systems or safety features,
including airbags, hazard lamp buttons
or (iii) impair the driver's ability to safely
operate the vehicle.
— Never install this product in front of or
next to the place in the dashboard, door,
or pillar from which one of your vehicle's
airbags would deploy. Please refer
to your vehicle's owner's manual for
reference to the deployment area of the
frontal airbags.
Before installing
Consult with your nearest dealer if instal-
lation requires drilling holes or other
modifications of the vehicle.
Before making a final installation of this
product, temporarily connect the wiring
to confirm that the connections are cor-
rect and the system works properly.
Installing this product
Installation notes
Do not install this product in places
subject to high temperatures or humidity,
such as:
Places close to a heater, vent or air
conditioner.
Places exposed to direct sunlight, such
as on top of the dashboard.
Chapter
28
63
En
Advertisement
Table of Contents
