Table of Contents
Advertisement
Reading the screen
1
2
3
4 5
6
1 App name
Shows the App name of the currently
playing.
2 Song title
Shows the title of the song currently
playing (when available). "No Title" is
displayed if there is no corresponding
information.
3 Artist name
Shows the artist name for the song
currently playing (when available). "No
Name" is displayed if there is no corre-
sponding information.
4 Album title
Shows the title of the album of the cur-
rent file (when available). "No Title" is
displayed if there is no corresponding
information.
5 Pause indicator
6 Album artwork
Album art of the current song is displayed
if it is available.
Using your iPhone
or smartphone
applications
WARNING
Certain uses of an iPhone or a smartphone
may not be legal while driving in your juris-
diction, so you must be aware of and obey
any such restrictions.
If in doubt as to a particular function, only
perform it while the car is parked.
No feature should be used unless it is safe
to do so under the driving conditions you are
experiencing.
Using AppRadio Mode
You can control applications for an iPhone
or a smartphone directly from the screen
(AppRadio Mode).
In AppRadio Mode, you can operate appli-
cations with finger gestures such as tap-
ping, dragging, scrolling or flicking on the
screen of this product.
p In this chapter, iPhone and iPod touch
will be referred to as "iPhone".
p The compatible finger gestures vary
depending on the application for an
iPhone or a smartphone.
p When an application not compatible with
AppRadio Mode is started, depending
on the application, you can see an image
of the application on the screen of this
product. However, you will not be able to
operate the application.
To use AppRadio Mode, install the
AppRadio app on the iPhone or smart-
phone beforehand to enable launching of
the application on this product. For details
about the AppRadio app, visit the follow-
ing site:
http://www.pioneer.eu/AppRadioMode
p Be sure to read Using app-based con-
nected content before you perform this
operation.
For details, refer to Using app-based con-
nected content on page 73.
Pioneer is not liable for any issues that
may arise from incorrect or flawed app-
based content.
The content and functionality of the
supported applications are the respon-
sibility of the App providers.
In AppRadio Mode, functionality
through the product is limited while
driving, with available functions deter-
mined by the App providers.
Availability of AppRadio Mode func-
tionality is determined by the App
provider, and not determined by Pioneer.
AppRadio Mode allows access to
applications other than those listed
(subject to limitations while driving), but
the extent to which content can be used
is determined by the App providers.
Using the touch panel keys (App
control side bar)
1
2
3
4
5
6
1 Displays the source list.
For details, refer to Selecting a front
source on the source list on page 11.
2 Displays the launcher application screen.
3 Displays the previous screen.
p When you use the iPhone, this key is not
appears.
4 Displays the menu screen.
p When you use the iPhone, this key is not
appears.
5 Displays the Phone menu screen.
For details, refer to Displaying the phone
menu on page 14.
6 Displays the current source.
p In AppRadio Mode, App control side bar
will appear.
p If you press the HOME button twice, the
App control side bar will disappear. Press
the HOME button twice again, and the
App control side bar will appear.
Starting procedure
When connecting an iPhone or smartphone
to this product, you must select the method
for connecting your device. Settings are
required according to the connected device.
For details, refer to Chapter 5.
The procedure varies depending on the type
of device.
For iPhone with a 30-pin connec-
tor users
1 Connect your iPhone.
For details, refer to Connecting an iPhone
with 30-pin connector on page 61.
2 Press the HOME button to display
the Top menu screen.
3 Touch [APPS].
A message, which notifies you that your
iPhone can launch the application, appears
on the screen.
A message, which asks you whether you
want to launch your application, appears on
your iPhone.
4 Use your iPhone to launch the
application.
The AppRadio app is launched.
5 Touch [OK] on the screen of this
product.
The AppRadio Mode screen (Application
menu screen) appears.
p If you connect your device while an
AppRadio Mode-compatible application
is already running, the application opera-
tion screen will appear on this product.
6 Touch the desired application icon.
The desired application is launched, and the
application operation screen appears.
7 Operate the application.
8 Press the HOME button to go back
to the Top menu screen.
For iPhone with a Lightning con-
nector users
1 Register your iPhone and connect
it to this product via Bluetooth
wireless technology.
p The registered device must be selected as
the priority device.
For details, refer to Registering your
Bluetooth devices on page 12.
2 Unlock your iPhone.
3 Connect your iPhone.
p The cable connection method varies
depending on your device.
For details, refer to Connecting an iPhone
with Lightning connector on page 60.
4 Press the HOME button to display
the Top menu screen.
5 Touch [APPS].
The AppRadio app is launched, and the
AppRadio Mode screen (Application menu
screen) appears.
Chapter
13
33
En
Advertisement
Table of Contents
