Advertisement
ASSEMBLY INSTRUCTIONS
partS liSt
A) Top panel .........................................................................................................................1
B) Base (Fireplace insert included) .................................................................................1
C) Back panel .......................................................................................................................1
D) Base support panel ........................................................................................................1
E) Left side panel ................................................................................................................1
F) Right side panel ..............................................................................................................1
G) Left inner panel ..............................................................................................................1
H) Right inner panel ............................................................................................................1
W) KD screws ..................................................................................................................... 72
X) Plastic connectors........................................................................................................ 24
Y) Self repair kit ...................................................................................................................1
Y) SELF REPAIR SET
Touch-up repair paint (bottle)
L-shape bracket ................................................................................................................... 2
Screws for L bracket ........................................................................................................... 8
Plastic connectors ............................................................................................................... 1
KD screws ............................................................................................................................ 3
KD nuts ................................................................................................................................. 3
CAUTION: Carefully move the assembled unit to the desired location. The fireplace
mantel should not be positioned in an area exposed to direct sunlight.
TOOL REQUIRED: PHILLIPS HEAD SCREWDRIVER
MANTLE ASSEMBLY:
CAUTION: Place a piece of cardboard or protective sheet on the floor in order to
avoid scratching the decorative surface of your mantle during assembly.
Please DO NOT fully tighten the KD screws until all panels are assembled.
NOTE: If the KD screw(s) do not fit during assembly, loosen the 2 screws to adjust the
Plastic Connector until the PANEL/KD SCREWS are able to be installed. Tighten all KD
screws once all panels are assembled.
Step 1: Attach all plastic connector [X] to panels A, B, C and D with KD screws. (2
screws for each plastic connector). See Fig. A.
2
Advertisement
