Page 1
Instructions for use and installation instructions Instructions d'utilisation et avis de montage Gebruiksaanwijzing en montagehandleiding Istruzioni di uso e di montaggio Instrucciones de uso y de montaje Instruções de uso e de montagem Ο∆ΗΓΙΕΣ ΧΡΗΣΗΣ ΚΑΙ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ EKI 407.0M 226753 P41...
Disposing of the packaging Please ensure the environmentally-friendly disposal of the pack- aging that came with your appliance. Recycling the packaging material saves on resources and cuts down on waste. Disposing of old appliances The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Safety instructions Connection and operation Safety instructions • The appliances are constructed in accordance with the rele- vant safety regulations. • Connecting the appliance to the mains and repairing and serv- icing the appliance may only be carried out by a qualified elec- trician according to currently-valid safety regulations.
Appliance description Appliance description The decorative design may deviate from the illustrations. 1. Rear induction cooking zone 2. Front induction cooking zone 3. Glass ceramic hob 4. Touch-control operating panel 5. Rear cooking zone controls 6. Front cooking zone controls 7.
Operation The hob Operation The hob is equipped with an induction cooking mode. An induc- tion coil underneath the glass ceramic hob generates an electro- magnetic alternating field which penetrates the glass ceramic and induces the heat-generating current in the pot base. With an induction cooking zone the heat is no longer transferred from a heating element through the cooking pot into the food being cooked;...
Operation Cookware for induction hobs Cookware for induction cooking zones must be made of metal and have magnetic properties. The base must be sufficiently large. Only use pots with a base suitable for induction. Suitable cookware Unsuitable cookware Enamelled steel pots with a thick Pots made of copper, stain- base less steel, aluminium, oven-...
Operation Suitable for induction cooking Operating the keys The controls described here expect the pressing of a (selection) key to be followed by the pressing of a subsequent key. The next key will need to be pressed within 10 seconds, otherwise the selection will be deleted.
Operation Child safety device / lock The child safety device/ lock can be used to lock key operation and cooking level settings. Only the ON/OFF key can be used to switch the hob off. Switching on the child-safety lock: 1. Press the ON/OFF key in order to switch on the childproof lock.
Operation Automatic switch-off (timer) The automatic switch-off device is used to automatically switch off any cook- ing zone after a stipulated period of time. Cooking times ranging from 1 minute to 99 minutes can be set. 1. Select a power setting for a cooking zone and place a pan on the zone. 2.
Operation Automatic boost function Power setting Time (min:sec) 0:50 1:40 3:30 3:40 5:20 9:00 3:30 4:00 Modules (power management) Automatic boost function Parboiling takes place at power level 9 with the automatic boost function. After a certain time the power level will switch down automatically to a lower simmering setting (1 to 8).
Cleaning and care Cleaning and care • Switch the hob off and let it cool down before you clean it. • Never clean the glass ceramic hob with a steam cleaner or similar appliance! • When cleaning make sure that you only wipe lightly over the ON/OFF key.
What to do if trouble occurs What to do if trouble occurs Interference with and repairs to the appliance by unqualified per- sons are dangerous as they can result in an electric shock or a short circuit. Do not interfere with or try to repair the appliance; this could cause injury to persons and damage to the appliance.
Instructions for assembly Note Instructions for assembly The KÜPPERSBUSCH induction hob may only be built-in in accordance to the instructions included in this manual: In case of a failure to observe these instructions, KÜPPERS- BUSCH shall decline any liability and the approved marks of conformity become invalid! Safety instructions for kitchen unit fitters •...
Page 14
Instructions for assembly Dimensions in mm Clips • Drive the clips into the worktop cut-out at the intervals indicated. It is not necessary to adjust the height due to the horizontal stop. • Important: The horizontal drive of the clips must be flush with the worktop (avoid the risk of fractures).
Instructions for assembly Electrical connection • Statutory regulations and the connection specifications issued by the local power supply company must be strictly observed. • Any superfluous cable must be removed from the installation area beneath the appliance. • Make sure that the local mains voltage is the same as the volt- age on the rating label.
Need help?
Do you have a question about the EKI 407.0M and is the answer not in the manual?
Questions and answers
The two burner stove top will not operate below 60°F. an error message E6 occurs at temperatures below 60°. Operation above 60° is normal