Before First Use - AEG MCC2581E-m User Manual

Hide thumbs Also See for MCC2581E-m:
Table of Contents

Advertisement

8
www.aeg.com
www.aeg.com
8
Turntable installation
1. Place the turntable support on the
cavity bottom.
2. Place the turntable on top of the
turntable support as shown in the
diagram. Make sure that turntable
hub is securely locked in the
turntable shaft. Never place the
turntable upside down.

4. BEFORE FIRST USE

Setting the clock
After your microwave oven is rst
plugged-in or after a power failure, the
clock display will ash to indicate that the
time shown is not correct. Before using
the microwave oven, adjust the clock
through the procedure described below
but starting on Step 2.
To set the clock, proceed as follows:
1. Press the "Clock" key until the hours
start to ash.
2. Turn the rotary encoder to set the
3. Press the "Clock" key until the
minutes start to ash.
4. Turn the rotary encoder to set the
5. To nish, press the clock key again.
Child lock
The oven functioning can be blocked
(for example to stop it being used by
children).
1. To block the oven, press the "Auto
Cook" and "Clock" key for 2
seconds. A lock will appear in the
display.
2. To unblock the oven repeat the
operation.
Interrupting a cooking cycle
You can stop the cooking process at any
time by pressing the Stop key once or by
opening the oven door. In both cases:
www.preciz.hu
must always be used
always placed on this turntable for
cooking.
anticlockwise; this is normal.
immediately.
hot. Danger of burning!
indicating the operating time that is
left.
If you wish, at this time you can:
Turn or stir the food to ensure it will
evenly be cooked.
To restart the process, close the door
and press the Start key.
Kitchen timer
This function can be used as a minute
minder. When using this function you are
not de ning how long you wish the timer
to run but you are de ning at which time
you wish the alarm to sound.
1. Press the "Clock" key until the hours
2. Turn the rotary encoder to set the
3. Press the "Clock" key until the
4. Turn the rotary encoder to set the
5. Press the "Start" key.
start to ash.
minutes start to ash.

Advertisement

Chapters

Table of Contents
loading

Table of Contents