Switch The Device On And Off; Antenna Locations; Configuration Settings; Settings Wizard - Nokia 6730 classic User Manual

Switch the device on and off

Press and hold the power key to
switch the device on and off. A
short press of this key ends calls
and applications.
If the device asks for a PIN code,
enter the PIN code, and select
OK.
If the device asks for the lock
code, enter the lock code, and
select OK. The factory setting
for the lock code is 12345.
To set the correct time zone,
time, and date, select the
country you are presently in,
then enter the local time and date.

Antenna locations

Your device may have internal and external antennas. Avoid
touching the antenna area unnecessarily while the antenna
is transmitting or receiving. Contact with antennas affects the
communication quality and may cause the device to operate
at a higher power level during the operation and may reduce
battery life.
Cyan Cyan

Configuration settings

Before you can use multimedia messaging, e-mail,
synchronisation, streaming, and the browser, you must have
the proper configuration settings in your device. Your device
may automatically configure browser, multimedia
messaging, access point, and streaming settings based on
the SIM card used. If not, you can use the Settings wizard
application to configure the settings. You may receive the
settings as a configuration message that you can save to your
device. For more information on availability, contact your
service provider or nearest authorised Nokia dealer.
When you receive a configuration message, and the settings
are not automatically saved and activated, 1 new message
is displayed. To save the settings, select Show > Options >
Save. You may need to enter a PIN code provided by the
service provider.

Settings wizard

Select Menu > Settings > Sett. wizard.
Magenta Magenta Yellow Yellow Black Black
Get started
11