Data Cable - Nokia 6730 classic User Manual

Options > Delete all. If you are currently connected to a
device and cancel the pairing with that device, pairing is
removed immediately, and the connection is ended.
To allow a paired device to connect automatically to your
device, select Set as authorised. Connections between your
device and the other device can be made without your
knowledge. No separate acceptance or authorisation is
needed. Use this status for your own devices, such as your
compatible headset or computer, or devices that belong to
someone you trust. If you want to accept connection requests
from the other device separately every time, select Set as
unauthorised.
To use a Bluetooth audio accessory such as a Bluetooth
handsfree or headset, you need to pair your device with the
accessory. For the passcode and further instructions, see the
accessory user guide. To connect to the audio accessory,
switch on the accessory. Some audio accessories connect
automatically to your device. Otherwise, open the paired
devices tab, select the accessory and Options > Connect to
audio device.
Block devices
Select Menu > Settings > Connectivity > Bluetooth.
To block a device from establishing a Bluetooth connection
to your device, open the paired devices tab. Select a device
you want to block and Options > Block.
To unblock a device, open the blocked devices tab, and select
Options > Delete. To unblock all blocked devices, select
Options > Delete all.
Cyan Cyan
If you reject a pairing request from another device, you are
asked if you want to block all future connection requests from
this device. If you accept the query, the remote device is
added to the list of blocked devices.

Data cable

To avoid damaging the memory card or corrupting data, do
not disconnect the USB data cable during a data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect the
device to a compatible PC with the USB data cable.
2. When the device asks which mode to use, select Mass
storage. In this mode, you can see your device as a
removable hard drive in your computer.
3. Transfer data between the computer and your device.
4. End the connection from the computer (for example, from
an Unplug or Eject Hardware wizard in Windows) to avoid
damaging the memory card.
To modify the USB mode settings, select Menu > Settings >
Connectivity > USB.
To change the USB mode you normally use with the data
cable, select USB connection mode.
To set the device to ask which mode to use each time you
connect the USB data cable to the device, select Ask on
connection > {No display_text mapping for
'qtn_usb_settings_ask_on.usbclasschangeui',
locale='en'}.
Magenta Magenta Yellow Yellow Black Black
Connectivity
59