Table of Contents
Advertisement
SAFETY RULES
1)All persons operating the ride-on lawnmower must be familiar with the
operating instructions.
Very important regulation: This machine must not be operated by any
person under the age of 16 or under the effect of alcohol or medicines.
2)Exhaust fumes from petrol engines: these fumes contain harmful carbon
monoxide, never operate the engine in closed environments.
3)When operating the ride-on lawnmower make sure that no other persons,
especially children or pets, are in the vicinity of the ride-on lawnmower.
4)Please ensure that no foreign objects are in the lawn while operating the
machine.- Objects left on the lawn during operation could be thrown around
by the machine and cause damage, serious injury or even death.
5)No smoking in the vicinity of the mower during operation.
6)Only mow during daylight or under good lighting conditions.
7)Only mow upwards or downwards a slope NEVER at an angle or across
a slope. Special care is needed when changing direction on slopes.
8)When driving to the area to be mowed, ensure that the cutting deck is not
engaged.
9)Never operate the machine when the bodywork work is damaged or
without protective equipment (i.e. grass collector bag, etc).
10)The correct position of the engine block has been specifically designed
and set at the factory and must not be altered
11)Do not tilt the unit on its sides.
12)This ride-on lawnmower has a safety device which switches off the
engine every time that the operator leaves his seat.
13)Keep your hands or feet away from the rotating blades. Stay away from
the discharge opening whilst the blade are rotating.
14)Switch off the engine and remove the key before manually moving or
lifting the machine.
15)Switch off the engine, remove the key and disconnect the spark plug
before conducting any maintenance.
Important: Remove start key whenever the operator leaves the tractor
unattended.
16)The engine must also be switched off:
l
when you leave the machine or during its transportation
l
before refuelling
l
during the grass collection bag emptying operations.
DESCRIPTION
A
(starts at page 119)
1 Seat
2 Steering wheel
3 Grass collection bag
4 Blade
5 Ignition key (electric-start version only)
TECHNICAL DETAILS
Engine
Ignition method
Gears
Maximum speed
Dimension with grass collection bag
Frame
Cutting
deck
Cutting width
Cutting height regulation
Uncut turning circle
Grass collection bag volume
Maximum operator weight allowed
UNPACKING/ ASSEMBLY
The ride-on lawnmower is packed in a carton and is already assembled apart from the steering wheel, seat, grass collection bag and front wheels (Some models
come with pre-assembled wheels). Please observe the following sequence when unpacking the machine:
1 - Unpack all the parts that have been delivered. Dispose of the carton and pallet in an environmentally friendly way.
2 - Check all the parts
3 - Begin assembly.
It is strictly forbidden to start the ride-on lawnmower (even for trial purposes) without completing assembly.
17)Take the greatest care during the mowing operations. Risk of injury!!
Keep fingers and limbs away from the area of the cutting deck and
bodywork. Wear gloves.
18)Before storing in a closed room, let the engine cool down.
19)In order to avoid risk of fire, the engine and exhaust must be kept free of
grass, leaves and leaking grease.
20)The grass collection bag must regularly be checked for signs of damage
21) Do not cut grass in reverse motion.
22) CAUTION! During the mowing/transfer operations and above all with
reverse gear on, make sure there are no other people in the area.
Maintenance and storage
1)Make sure that all nuts, bolts, and screws are kept well tightened to keep
the mower in a safe operating condition.
2)Never leave the machine with petrol in the tank within an enclosed area
where the fuel vapours could reach flames or sparks.
3)Allow the engine to cool before storing in any enclosure.
4)Keep the engine, exhaust and muffler, battery compartment and petrol
tank free from grass, leaves and excess lubricant, in order to reduce the
danger of fire.
5)Frequently check the grass bag for wear or deterioration
6)For safety reasons, be sure to replace worn-out or damaged parts in due
time.
7)If the fuel tank has to be drained, it is essential that this be done outdoor.
8)Assemble the blades following the corresponding instructions and use
only blades bearing the maker's name or the trademark of the
manufacturer or supplier and marked with the reference number. Only a
certified service dealer should change or service the blade.
9)To protect hands during dismantle or assembly of the blades, it is absolutely
essential to wear suitable protective gloves. Only a certified service dealer
should change or service the blade.
10)Never wash the tractor with water jets. Use a wet cloth to clean the
tractor to avoid the risk of corrosion.
6
Pull start rope (pull start version only)
7
Throttle lever
8
Battery
9
Cutting deck blade engage lever
10 Brake pedal
Electric / Pull cable
Five forward gears and one reverse gear.
2000 mm x 630 mm x 1020 mm
Five cutting height regulation
21
11 Gear shift lever
12 Deck height regulation lever
13 Petrol tank cap
14 Pilot light for engine run and full grass bag
indicator (electric start version only)
15 Grass collecting bag handle
6,0 Hp ÷ 6,5 Hp
8,0 Km/h
Polypropylene
Steel
62 cm
1,5 m
150 litre
120 Kg
ENGLAND
Advertisement
Table of Contents
