Table of Contents
Advertisement
OPERATING CUTTING DECK MECHANISM
The cutting system can be enabled only if the engine is on, lever (7) is positioned on
and the grass collecting bag is installed.
ENGAGING THE MOWER MECHANISM (starts at page 122)
I
3
1 - Engage the brake (9)
2 - Set the lever (10) on START position
The mower mechanism is now engaged and the blade is rotating.
3 - It is possible to begin cutting in forward gear after having released the brake pedal.
If the user stands up from the seat during the mowing, the engine switches off.
SWITCHING OFF THE MOWER GEAR
Release blade enabling lever (9) until this is off.
The blade stops turning in about 5 seconds.
(starts at page 123)
L
CONTROL/SAFETY DEVICES
a
Bag position microswitch
b
Brake pedal microswitch
c
Seat microswitch
d
Operation light (electric-starter version)
e
Bag full light (electric-starter version)
f
Blade enabled microswitch
MAINTENANCE
All maintenance, service and cleaning work must be carried out only after the engine has stopped and cooled off. The following operations
may be carried out by the user . All other maintenance, service and repair works must be carried out by an authorized dealer.
Engine check
Oil change
Engine air filter cleaning
Spark plug check
Engine air filter replacement
Battery and terminal cleaning
Brake check
Loose part check
Mower cleaning
In the event of using this ride-on lawnmower under extreme conditions and very high temperatures, check more
often.
(full throttle) , the operator is sitting on board the tractor
■
■
■
■
■
■
■
■
■
■
■
25
■
■
■
■
■
■
ENGLAND
Advertisement
Table of Contents
