Toolbar - Cisco Catalyst 2950 Software Configuration Manual

Menus and Toolbar

Toolbar

The toolbar buttons display commonly used switch and cluster configuration options and information
windows such as legends and online help. Hover the cursor over an icon to display the feature.
describes the toolbar options, from left to right on the toolbar.
Table 3-12 Toolbar Buttons
Toolbar Option
Print
1
Preferences
2
Save Configuration
2
Software Upgrade
1
Port Settings
1
VLAN
Inventory
Refresh
Front Panel
3
Topology
3
Topology Options
2 3
Save Topology Layout
Legend
Help For Active Window
1. Some options from this menu option are not available in read-only mode.
2. Not available in read-only mode. For more information about the read-only and read-write access modes, see the
on page 3-30.
3. Available only from a cluster-management session.
Catalyst 2950 Desktop Switch Software Configuration Guide
3-20
Keyboard
Shortcut Task
Ctrl-P Print a CMS window or help file.
Ctrl-R Set CMS display properties, such as polling intervals, the views to open at CMS
startup, and the color of administratively shutdown ports.
Ctrl-S Save the configuration for the cluster or switch to Flash memory.
Ctrl-U Upgrade the software for the cluster or a switch.
– Display and configure port parameters on a switch.
– Display VLAN membership, assign ports to VLANs, and configure 802.1Q
trunks.
– Display the device type, the software version, the IP address, and other
information about a switch.
– Update the views with the latest status.
– Display the Front Panel view.
– Display the Topology view.
– Select the information to be displayed in the Topology view.
– Save the presentation of the cluster icons that you arranged in the Topology view
to Flash memory.
– Display the legend that describes the icons, labels, and links.
F1 key Display the help for the active open window. This is the same as clicking Help
from the active window.
Chapter 3 Getting Started with CMS
Table 3-12
"Access Modes in CMS" section
78-11380-04