Device And Link Labels - Cisco Catalyst 2950 Software Configuration Manual

Topology View
Figure 3-9

Device and Link Labels

The Topology view displays device and link information by using these labels:
•
•
•
•
When using these labels, keep these considerations in mind:
•
•
•
You can change the label settings from the Topology Options window, which is displayed by selecting
View > Topology Options.
Catalyst 2950 Desktop Switch Software Configuration Guide
3-12
Topology-View Link Icons
Cluster and switch names
Switch MAC and IP addresses
Link type between the devices
Link speed and IDs of the interfaces on both ends of the link
The IP address displays only in the labels for the command switch and member switches.
The label of a neighboring cluster icon only displays the IP address of the command-switch IP
address.
The displayed link speeds are the actual link speeds except on the LRE links, which display the
administratively assigned speed settings.
Chapter 3 Getting Started with CMS
78-11380-04