Configuring And Enabling Port Security Aging - Cisco Catalyst 2950 Software Configuration Manual

Configuring Port Security
Command
Step 5
show port security [interface
interface-id] [address]
Step 6
copy running-config
startup-config

Configuring and Enabling Port Security Aging

You can use port security aging to set the aging time for all secure addresses on a port. Two types of
aging are supported per port:
•
•
Use this feature to remove and add PCs on a secure port without manually deleting the existing secure
MAC addresses while still limiting the number of secure addresses on a port. You can enable or disable
aging of statically configured secure addresses on a per port basis.
Catalyst 2950 Desktop Switch Software Configuration Guide
17-6
Absolute—The secure addresses on that port are deleted after the specified aging time.
Inactivity—The secure addresess on this port are deleted only if the secure addresses are inactive
for the specified aging time.
Chapter 17
Purpose
Verify the entry.
(Optional) Save your entries in the configuration file.
Configuring Port-Based Traffic Control
78-11380-04