KTM 400 EXC RACING Owner's Manual page 10

OPERATION INSTRUMENTS
»
Activating and deactivating display modes
In the display mode SPEED/H, press and hold the
access the SETUP menu. The active functions will be displayed. The blink-
ing function can be activated by pressing the + button and deactivated by
pressing the – button.
Press and hold the button 3 seconds to store the settings.
If no button is pressed for 20 seconds, the setting will be stored automati-
cally and the display will return to the SPEED/H mode.
+ button
– button
briefly press button
hold button 3 secs.
The following display modes can be activated:
TR1 tripmaster 1
TR2 tripmaster 2
A1 average speed 1
A2 average speed 2
S1 stop watch 1
S2 stop watch 2
CLK clock
LAP lap time
MAX maximum speed
KMH/MPH display in kilometers or miles (see: Kilometers or miles)
If you have activated all of the display modes, they will be displayed in the
following order:
SPEED/H, SPEED/CLK, SPEED/LAP, LAP/LAP, SPEED/MAX, SPEED/ODO,
SPEED/TR1, SPEED/TR2, SPEED/A1, SPEED/A2, SPEED/S1, SPEED/S2
SPEED / CLK (time) display mode
CLK displays the time in hours, minutes and seconds.
+ button
– button
briefly press button
hold button 3 secs.
To set the clock, see „Setting the clock".
SPEED / LAP (lap time) display mode
You can use the manual stop watch to stop and store up to 10 lap times,
which you can view in the LAP/LAP display mode (see below).
LAP displays the lap times in hours, minutes and seconds.
+ button
– button
briefly press button
hold button 3 secs.
button for 3 seconds to
activates the blinking display
deactivates the blinking display
changes to the next display without changing any
settings
starts the SETUP
stores the settings and changes to the SPEED/H
mode
no function
no function
changes to the next display mode
set the clock menu
Starts and stops the stop watch, lap time is not
reset to 0
Stops the stop watch, stores the lap time and restarts
the stop watch again. The time is reset to 0. A total
of 10 lap times can be stored. If the lap time con-
tinues to run after you press the - button, all 10 mem-
ory locations are occupied.To clear all of the stored
lap times, hold the button for 3 seconds in the
SPEED/LAP mode.Up to 10 lap times can be stored
in this way.
Changes to the next display mode.If no lap time is
stored or the motorcycle is driving, the LAP/LAP
mode will be skipped.
Clears all LAP figures
9