Start Up; Operation - Kärcher T9/1 Bp Manual

Start up

The appliance can be operated in 2 ways:
1 Operation with fleece filter bag or paper
filter bag (option)
2 Operation without filter bag
 Check whether main filter basket has
been inserted into the appliance.
Installation of the filter bag
 Release and remove the suction head.
 Remove the main filter basket.
 Install the fleece filter bag or the paper
filter bag (option).
 Insert main filter basket.
 Insert and lock the suction head.
Insert the battery
Illustration
Note: Press the battery downwards up to
the end when you insert it in the device.
Charge the battery
Illustration
Note: Please read the operating instruc-
tions of the charger manufacturer, espe-
cially the chapters on safety instructions!
The battery is partially charged at the time
of delivery. Charge it before appliance
startup and then as and when required.
Note: The battery can be charged only
when it is removed out of the appliance.
 Insert the charger delivered with the ap-
pliance into a proper socket.
 Insert the battery in the charger.
Charging time for empty battery (per bat-
tery)
BC 4/3.0 quick charger, 4-
times (max. 4 batteries can be
charged one after the other)
Quick charger, BC 1/1.8, sin-
gle (special accessory)
Note: The appliance may only be operated
with closed battery compartment.
The appliance can be operated in 2 ways:
Mains operation
–
Battery operation
–
Note: If the power supply is assured for
both the operating types, the device auto-
matically switches over to mains opera-
tions.
Power supply through electrical connec-
tion.
 Plug in the main plug.
Power supply from battery. Only one bat-
tery is required for operating the device.
Battery is empty or has not been insert-
ed
Indicator lamp of the empty battery
–
blinks
Appliance automatically shifts to the
–
charged battery mode.
Both the batteries are empty
Both the indicator lamps blink for 30
–
seconds.
Appliance switches off.
–
Mains operations are possible.
–
Note: We recommend that you operate the
appliance in the mains mode while cleaning
textile covering because of the high clean-
ing power that is required for such jobs.
 Switch on the appliance at the main
1:00 h
switch.
 Set the selection switch of the floor noz-
zle to hard surface or carpet.
1:45 h  Regulate the suction force on the suc-
tion force regulator (continuous).
 Perform the cleaning operation.
– 3
EN

Operation

Mains operation
Battery operation
Cleaning operations
13