Connecting To A Non-Broadcasting Wireless Network Using Dhcp - Insignia NS-32LB451A11 User Manual

Insignia 32" LCD TV/Blu-ray Combo, 1080p
6 Press or to highlight WPS Pin, then press
ENTER. The following screen opens.
WPS Pin
7 Use the number buttons on the remote to enter
the WPS pin (typically found on the back of the
router), then press ENTER. If the wireless
network is functioning, a connected icon and a
message saying that you have connected to the
network appear on the screen.
Connection to wifi_me... Success
8 Press ENTER to close the message. Your
TV/Blu-ray combo is now connected to the
network. In the future, when you turn on your
TV/Blu-ray combo, it will automatically connect
to the network. You do not need to repeat these
steps again.
9 Press to go to the previous menu.
Connecting to a non-broadcasting wireless
network using DHCP
To connect to a non-broadcasting wireless
network using DHCP:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight Network, then press
ENTER. The Network menu opens.
Parental
Settings
Audio
Language
wifi_me
Close
System
Wired
Network
Wireless
Network Test
Display
www.insigniaproducts.com
3 Press or to highlight Wireless, then press
ENTER. The list of wireless options opens.
Parental
System
Network
Settings
Display
Audio
Language
4 Press or to highlight Manual, then press
ENTER. The Manual menu opens.
Manual
AdHoc
Encryption
Name
Cancel
5 Press or to highlight AdHoc, then press
ENTER. The following menu opens.
Please choose a new AdHoc.
On
Off
6 Press or to highlight On or Off based on the
AdHoc property of the non-broadcasting
network, then press ENTER. The Manual menu
reopens.
7 If the network is encrypted, press
highlight Encryption, then press ENTER. The
following menu opens.
Please choose a new Encryption.
Disabled
Shared WEP
WPA2 PSK AES
WPA2 PSK TKIP
WPA PSK AES
WPA PSK TKIP
Network List
WiFi Protected Setup (WPS)
Manual
IP Settings
Off
Disabled
or to
59